Best portable solar chargers. Bigblue solar panel

Best portable solar chargers

We reviewed 25 products and spent over 100 hours scientifically field testing the top 15 portable solar panels to find the best ones for modern survival. After considering price, durability, performance, size, and weight, we recommend the Ryno Tuff 21W Portable Solar Charger.

• March 10, 2022 : The Goal Zero Nomad 7 Plus, Goal Zero Nomad 14 Plus, Renogy Portable E.Flex 10W, iClever USB Solar Charger, and X-DRAGON 14W have been discontinued
• Collapse Most Recent Updates

Being prepared for emergencies means being able to generate electricity without the grid. There are bigger solar panels for your home and basecamp, but many preppers want to charge their portable batteries and USB-powered devices (e.g. phones) while on foot. These portable solar panels, which are typically marketed for backpacking, hiking, or camping, are a core part of many people’s go-bags and car kits.

Portable solar chargers pair well with a rechargeable battery pack (either a single Li-Ion pack or a charger for AA-style batteries), and some of them even come with a built-in battery pack.

Despite how simple these USB solar chargers appear — you put them in the sun and plug your gear into them, right? — there’s a lot more to picking the right charger and learning how to use it effectively than you might imagine.

Check out the beginner’s guide to off-grid power for the basics in simple terms and what kind of gear you need for your goals.

• Bigger panels always perform better. Get the biggest you can within your space, weight, and budget limits.
• Time of day doesn’t matter nearly as much as placing the panels perpendicular to the sun.
• Despite what you might read in guides, it appears to be very rare for panels to not go back up to full power after a Cloud passes overhead. This may have been an issue for older panels, but it seems to have been fixed in the current generation.
• Heat decreases panel performance, so keep your panels off of hot surfaces like stone or metal. Some of the panels that heated up quite a bit had Rapid voltage and current oscillations, and these wild swings lowered the total overall energy output over the course of a test run.
• Avoid charging your phone/headlamp/whatever directly from a solar panel in the hot sun. Rather, charge a battery pack first, then use that pack to charge your phone.

Read below the fold for deep details on our testing methods and data, tips on getting the most from your panel, and more.

Best for most people:

Ryno Tuff 21W USB Solar Charger

This fairly-priced and high-power charger is not exactly compact at 1 pound and 1 square meter of panel surface area, but it’s thin and light enough to be fine in a typical pack.

The best portable solar panel for most people is the Ryno Tuff 21W. After hours of testing with a load tester and a multimeter, this charger ranked at or near the top of our review in the key areas of power output, watts per ounce, and efficiency. As we measured weather, sunlight levels, and panel heat in a variety of conditions, the Ryno Tuff was able to maintain an impressive 10W on a single USB port. In fact, we even got it all the way up to 12W for a bit on one test run. The price is also right — often coming in 5-10 cheaper than the competition — to the point that not only is it the overall winner but it’s the best budget option as well.

As of June 2022, customer service seems to be non-existent for Ryno Tuff. It is a quality panel and is still being sold by reputable sellers, but do not expect any sort of warranty or customer service.

We strongly recommend pairing a solar charger with a separate external USB battery bank so that you don’t have to ruin your gadgets built-in batteries by baking them in the sun during a charge cycle. Many of the products in this guide sell versions with and without a battery built into the solar charger. Although we prefer keeping the charger and battery separate, it’s not wrong if you pick the built-in battery version.

CHOETECH 19W USB Solar Charger

A very close second place, this panel is slightly more compact than the Ryno Tuff competitor at 0.9 square meters of total PV area. Slightly larger but 40% heavier than the Renogy.

The CHOETECH 19W is a great alternative — if you can find the CHOETECH for about the same price as the Ryno Tuff, confidently grab whichever one you’d like. The CHOETECH weighs the same as the Ryno Tuff yet folds into a slightly more compact design that saves precious space in smaller bags. The build quality is solid, just like the Ryno, but we did like the CHOETECHs embedded metal rings more than the cloth loops on the Ryno. This panel produced slightly less peak power than the Ryno in most of our testing, but the overall performance is close enough in most conditions.

Great for low light:

BigBlue 3 28W Solar Charger

This big 1.3 square meter panel can squeeze power out of the worst weather conditions, but clocks in at 1.33 pounds.

On the other hand, grab the BigBlue 28W Solar Charger if you want more power and are willing to deal with a larger panel. Total panel area directly affects power output — especially when dealing with constant low-light conditions — so preppers in locations like the Pacific Northwest may need to bite the bullet and carry a bigger charger if they really care about power preparedness. The BigBlue features three USB ports and did very well in our tests. The extra size makes it one of the heaviest chargers in our review, but on cloudy days it produced twice the output (8W vs 4.5W) of the Ryno and Choetech.

Although the BigBlue has a smaller height and width than the Ryno Tuff, the extra panel makes it heavier and thicker when folded up. The Renogy is much smaller and lighter than both.

• Difference between advertising and reality
• Angle to the sun matters
• Panel size directly impacts power
• How long will it take to charge my phone?
• How to figure out your device charge times
• Why USB charging is weird
• How we picked the competition
• How we tested
• Why other hiking solar charger reviews are flawed
• Nerdy notes on how to read the full test results
• Review data for each panel

Common sense prepping, straight to your inbox.

Get our free newsletter for great new articles and giveaways. 1-2 emails a month. 0% spam.

Advertised numbers don’t reflect reality

Our testing shows that real-world performance almost never reaches what the companies claim. At best, you should use those numbers to understand relative differences between products. If you have specific numbers you need to hit, such as watts or amps, assume there’s at least a 25-50% drop off from the marketing data.

Most USB chargers have names like RAVPower 16W, with the 16W label referring to the amount of power in watts. But manufacturer-provided power ratings are generated under highly artificial test conditions in order to promote the highest number possible.

It’s better to use those advertised wattage numbers as a rough indication of general panel size and relative power performance — e.g. a panel labeled 20W is probably a bit stronger and bigger than one labeled as 10W, even though neither panel will hit their advertised numbers.

Similarly, we found the amps coming out of a USB port almost never reached the rated maximum. For example, one panel that advertised 2.4 amps of USB output actually never got above 1.8.

Power output greatly depends on angle to the sun

Our testing found that how the panel is angled relative to the sun matters a lot more than simply the time of day. A panel at a bad angle at high Noon will perform worse than the same panel pointed directly at the sun at 6 PM. Even a few degrees off of 90/perpendicular makes a noticeable difference.

Some of these chargers hit maximum output even as late as 7 PM — just through proper positioning.

You know all those marketing pictures where the panel is strapped to the back of a hiker’s pack, using the attached loops that are helpfully built into the panels for that express purpose?

This will only work if the sun is directly behind you or you can get some portion of the panel on top of the bag. Vertical almost never works, especially if you keep changing the orientation of the panel to the sun.

You don’t have to baby the panel every few minutes, just be Smart about your positioning. Worst case: lay the panel flat through the mid-day hours.

To see how important the sun angle is in real wattage numbers, here’s a graph of an orientation test with the BigBlue 3 28W panel on a sunny, early September day at about noon.

We rotated the panel through a series of positions while making an audio recording of calling out the positions and timestamps so that we could mark them on the graph above. You’ll see that the sunlight level is constant at about 750W/m2, but the panel’s power output swings wildly with each position.

As we moved the panel from flat to 45 degrees from the sun, for example, the power output jumped from just under 12W to 14W. Turning the panel to 45 degrees facing away from the sun dropped the power output all the way down to two watts.

Total panel size is the biggest power factor

Regardless of the brand, technology, or price, total panel surface area is the number one factor behind solar charger performance. You can’t beat this by throwing money at it, either — for max power and best output under a wide range of conditions, it’s generally better to go big and cheap than small and expensive.

The scatter plot below compares each charger’s total panel area (in square meters) against the average power output during the best-performing test run. For the scientifically inclined, there’s a strong correlation with a p value of 0.8.

Chargers with smaller overall panel area were also more sensitive to a wider range of sunlight conditions. It took more sunlight to max them out, and they dropped off quickly under less-than-ideal light.

Although bigger is clearly better, the idea is to be portable, which is why we chose not to include panels we felt were too big for a common go-bag. Just get the biggest you can within your space, weight, and budget constraints.

How long will it take to charge my phone?

The main question — in most cases the only question — that everyone wants an answer to when shopping for portable USB solar chargers is: how long will this take to charge my phone if I put it in direct sunlight?

Like it or not, the answer is “it depends.” There are so many different factors that go into that question that any blanket answers are lying for the sake of ease.

Consider answering “which car can drive furthest on a gallon of gas?” To test that, you’d need everything else to be the same — the same tires, same route, same weather conditions, same type of oil and gas, same weight in the vehicle, and so on.

Similarly, different solar chargers behave differently depending on weather conditions, angle to the sun, temperature, the type of device they’re plugged into, etc. And different chargeable devices have different battery chemistries, capacities, charging algorithms, etc.

Later in this review, we explain how we handled those differences to be as scientific as possible and why most other portable solar charger reviews you see online are inherently flawed because they aren’t measuring apples to apples.

How to figure out your device charge times

Two numbers matter when charging any kind of battery: watt-hours (Wh) and volts (V).

Each battery holds a certain number of watt-hours of energy. So for an empty 9Wh battery, you need to supply it with 9 watts for an hour or 4.5 watts for 2 hours (and so on) to bring it up to full charge. The more watts your charger puts out, the faster your gear will charge.

This chart shows the amount of sun a test panel received over an hour (yellow) which was consistent on a sunny day, how much power the panel put out from that sunlight at any given moment (red/watts), and how much cumulative energy was sent to the USB device (blue/watt-hours).

Think of the blue line as the total charge sent into a battery, which is why it builds over time.

So as you look through the test run charts for the different panels in this review, keep your eye on how that Wh line grows over time under different sunlight conditions to get a feel for how the panels would perform on different battery sizes.

For example, the Nekteck charger in the graph above created 9.3Wh of charge over an hour. Since an iPhone XS battery is 9.8Wh, it would’ve charged to about 95% (from zero) in an hour. Again, though, these are ballpark numbers, because the iPhone would vary its voltage needs and current draw from the panel as its internal battery progresses through its charge cycle.

Why USB charging is weird

The kinds of lithium-ion batteries you’ll usually be charging via USB spend most of their usable battery life at 3.7V, but you’ll need to charge them at a minimum of 4.2V to get them up to 100 percent full. Depending on the specifics of the battery there may be a little wiggle room, but 4.2V is what you should aim for.

USB charging devices — whether they’re battery packs or solar panels — have USB ports with nominal 5V outputs. That 5V rating is a USB standard when charging a battery, but what differs from one USB flavor to another (-A.B, mini, etc.) are the amps the port can put out. For example, many older USB flavors can charge a battery at 1.5A, but some newer fast-charge flavors run at 2.1A.

The USB ports on the solar chargers we tested rated at different amperages, so in our spreadsheet we list the maximum amperage of the highest amperage port on each charger.

These amperage and power differences among ports solely affect how quickly a given device will charge when plugged into them. They do not pose a safety hazard for the following reasons:

You definitely cannot fry your phone by plugging it into a port that gives too much USB power. A 5V 2A = 10W USB port does not “push” 10W of power into whatever you plug into it. Rather, your device can pull up 10W — or whatever the rated maximum of the port is — at a time. So there is no danger of frying your phone if you plug it into a USB charging port that’s capable of putting out way more power than it can use. The phone will draw as much power from the port as it can, and the port won’t try to give the phone any extra power.

You probably cannot fry a USB charger port by plugging the wrong phone into it. Your tablet could try to pull 20W out of a 10W USB port, but if that USB port has overcharge protection then it will be fine. Most of the panels we tested don’t advertise overcharge protection, but this is so standard we’d be shocked if it’s not universal on these products.

How we selected the contenders

We created a spreadsheet of 26 panels after researching other reviews and scouring through preparedness, outdoor, and electronics forums for common recommendations. From there we chose the models that seemed like the best candidates, narrowing the field down to 15 for in-person testing.

Although size is always an issue, we focused on panels with advertised power over 10 watts, except for the Goal Zero Nomad 7, which we included due to its popularity among preppers. Most of the panels were provided by the manufacturer, but that never breaks our Prepared Promise.

How we tested

Besides normal qualities like price and durability, our goal was to isolate the panels and test their efficiency under different weather conditions, honing in on what kind of power output you can get depending on sunlight and changing environmental conditions.

Properly testing portable chargers takes a lot of time and specialized equipment. We’ve yet to find another review online that does this properly (details in next section).

We bought an irradiance meter to measure the energy of the sun hitting the panel, a multimeter to measure the output from the panel’s USB port, and a USB load tester that acts like a battery (but with Smart controls so we could change current draw).

We laid each panel out flat in the sun on an elevated Coolaroo pet bed over a light-colored stone deck so that air could circulate underneath. We placed our testing apparatus in a small box underneath the bed/panel for shade, with the irradiance meter’s sunlight sensor in the same place for every test.

That measuring gear logged lots of data over each testing session (typically a sample every 10 seconds), which we collected with a custom computer script to analyze the data and turn it into charts.

Our testing site was in central Texas, two miles from an airport. We recorded the METAR weather and sky condition data from that airport for the main run of tests.

Because ambient temp affects panel performance, we also tried to get a sense of how well panels handled the heat while baking in the sun by using the thermal FLIR camera built into a CAT S61 smartphone.

Additional nerd notes

• All measurements were taken from the first USB port, or from the quick-charging port if the panel had one.
• The USB load tester was set to draw two amps of current. If the panel’s output dropped too low, it would lose power, but every time it switched back on it immediately began drawing current again at the same two-amp level.
• The USB multimeter was powered by a separate USB power input, so if and when the panel dropped out due to Cloud cover it would keep recording.
• The duration of most of the tests was at least one hour, though we often let panels run for far longer to get a picture of how they performed under a wide range of conditions.
• The panels were brought out from an air conditioned house and plugged immediately into the testing apparatus, so all of the tests reflect a rise in panel temperatures over the course of the session.
• We only tested one USB port, even if the charger had multiple, because with panels of this relatively small size you really want to charge one thing at a time.
• You’ll see from our test data that by pushing up the amperage we were able to max out even the largest panels with just one port filled, so we’re confident that our ranking of the panels still holds even if we loaded more than one port.
• In general, most of the panels seemed to do best when you’re trying to pull less than the stated maximum current from them, and slightly worse when you’re at the maximum amperage or above it.
• As a result, rather than tune the current draw for each panel, we chose to use a constant 2A. Tuning the draw for each felt like that was more about testing the advertising claims, which was less important than real-world use.
• We chose 2A because the advertised USB output amperages ranged from 1.4A to 3A, with many at or close to 2.4A, so we erred on the low side. 2A also felt like the right threshold to reflect modern smartphones, tablets, etc.
• Because some of the panels, especially the smaller ones, really performed poorly under the 2A load, and the larger ones that could do more amperage were limited by it, we did some shorter test runs at different amperages ranging from 1A to 3A, depending on the panel.
• We used in the results from these shorter runs when they seemed appropriate, and weren’t dogmatic about only using the number from the 2A load. The idea is to get a realistic picture of what each panel can do, while also coming up with a meaningful way to rank them fairly.

Why other hiking solar charger reviews are flawed

As we researched this space, we were shocked at how unscientific and misleading other top-tier reviews are — so although we like to avoid talking about competitors, we decided to share our thinking in hopes of raising the tide in this market.

Most other sites went the quicker and cheaper route by taking the panel outside on a sunny day, plugging a partially charged Li-Ion battery into the panel for a set period of time, then judging the results solely by how many % points the battery increased (e.g. 10% to 15% charged). Panel A that increased a battery by 8% “won” over Panel B that went up 6%.

The problem here is that Li-Ion has a charging curve, so depending on what charge level you start at, it will take either more or less power to add percentage points to the charge meter. So unless they’re using the same battery at the same level of partial charge every time, the tests aren’t quite fair.

sophisticated sites will fully drain a battery pack, then plug it in and charge it, measuring the cumulative charge with a power meter. A few took it a step further, “confirming” the results by draining the bank back to empty and measuring the cumulative output.

That’s an improvement, but it’s still partially testing the battery and not just the panel in isolation. The battery’s temperature and the rate at which it’s charged and discharged both impact how much charge it holds. Which means temperatures and other factors will skew the results.

Some sites will do spot tests of the maximum panel output, reporting that the panel peaked at X volts and Y amps. That’s just as flawed as claiming a car can do 50 miles per gallon because the reviewer measured the gas efficiency while rolling downhill while idling. As you can see from our results, some of the panels go through periods where their output fluctuates wildly. Taking a partial snapshot doesn’t paint the whole picture. A proper test will measure performance and variables over time.

Finally, perhaps the most serious problem with the most popular solar panel tests is that there is not a single solar irradiance measurement in them — in fact, there’s often not even a weather report!

Solar irradiance (watts per meter squared) is the energy hitting the solar panel. The temperature of the panel affects its efficiency at converting that irradiance into electricity. So when they fail to take careful measurements of both the sun’s energy and the panel temp, it’s impossible to compare apples to apples. Vague talk of “sunny” or “passing clouds” isn’t nearly precise enough.

How to read the full test results

Sunlight (“irradiance”) is shown as a number like 600 w/m^2. In simple terms, that’s how much energy hits a surface that’s one square meter (about 10 square feet). We broke 1,000 w/m^2 on a 108F bright Texas day, otherwise a normal sunny day with the sun directly overhead was in the 750-900 range, partly cloudy or with the sun at an angle would be 500-750, and real Cloud cover would get down to about 120. On the charts, we divided these numbers by 100 to get them in the 0-10 range.

Power (watts) = volts x amps. In general, the panels held a steady voltage while the amperage varied a bit. You can get the base numbers for voltage and amperage from the spreadsheet for each test run.

Energy (watt-hours) is a running total of the power put into a battery over time. If the devices you care about have batteries measured in mAh (milliamp-hours), the beginners guide explains how to convert so you’re apples to apples.

Efficiency: The real panel efficiencies we measured were in the 0.2% to 1.5% range, so we multiplied by 10 to fit them into the charts alongside power. Much more on this in a following section, though.

Focus on the power output, not the voltage

If you dig into the test data, you’ll see that few of the panels ever got up to the 4.2V needed to fully charge the average Li-Ion battery, much less stayed there over the course of a run. This is not as big a deal as it may seem.

Just FOCUS on the power column. Since power = volts x amps, you can get 5W of power from 2.5V x 2A, or from 5V x 1A. For one test we may have dialed in a 2A load that’s only showing 2.5V, but if we dial it back to 1A on another run then we can always get closer to 5V.

Here’s what’s going on: Most modern USB devices, whether it’s a battery bank or an e-reader, have a controller chip that will intelligently charge the internal battery when you plug them in to one of these panels. So the chip will alter the charging port’s current draw to suit the battery’s voltage needs for whatever part of the charging cycle it’s at — if it’s early in a charge cycle, it may need a lower voltage and/or current than at the end of the cycle.

We ran a number of shorter tests on the panels that didn’t make it above 4.2V in the main test runs, in order to directly confirm that if we dial down the current draw to about 1 amp, the voltage gets well north of 4.2. So even the panels that have voltage readings in the 2.5V range will get up to 4.2V and fully charge a battery if you lower the current draw, as long as the device that battery is in has a charge controller that can manage the process by varying the current.

Understanding solar charger efficiency

Solar panel efficiency is expressed as a percentage of watts out divided by watts in. So we measured the watts/m^2 given off by the sun during each test run, multiplied that by the total area of each charger’s panels in square meters, and divided the measured wattage output by the results.

We never got real efficiency numbers over about 14% for even the best of these chargers under the most ideal conditions. This is below the 20% to 25% efficiency numbers advertised.

It could be that the panel technology is that efficient under some ideal lab conditions, but by the time they package it into a charger and hang some USB ports off it, that efficiency is lower.

Aeiusny 20W Solar Charger

Bottom line: The 70 Aeiusny 20W Solar Charger is a large, heavy unit that we expected big things from based on the size, but we were disappointed by the performance. We couldn’t get the panel’s power output to stabilize, and because the power output was all over the map, it didn’t put out much total charge on any given test run no matter how ideal the sunlight conditions were.

We liked the integrated rings and the build quality is decent. But given the problems we encountered, we can’t recommend the Aeiusny. We’ll hang on to it and revisit if the manufacturer fixes or clarifies the issues.

Test notes: This is one of the panels we suspect may be hampered in our tests by some sort of “Smart” device auto-detection circuitry. The charger touts the following feature on its Amazon listing page:

“Smart IC TECHNOLOGY: The Aeiusny Solar Panel has Smart IC Technology that detects the device using USB PIN signals and provides optimal charging power and optimal charging speed for both Android and iOS devices simultaneously, automatically adjusting to the demands of the device.”

You can see from the charts that the charger’s power output is very spikey, with the first test run seeing the current swing from about 2A down to 0.5A to 0A to 1.5A, as if it’s hunting around from among the standard USB current levels to find the correct one.

We’re not entirely sure what happened on the second test, but it’s most likely that the panel wasn’t plugged into the testing apparatus all the way, so the trace amount of power in the chart is actually coming from the USB power input and not from the panel input.

As for the third test, the irradiance meter was accidentally not recording, but the sky was perfectly clear with no clouds, so there wouldn’t be any Cloud cover reflected in it, anyway.

On the fourth test run, which was done with the load tester set to draw 3A of current, you can see that the panel spent most of its time close to zero, with the current spiking upwards periodically to between 1A and 2A. It’s as if the tester’s attempt to draw a higher load really threw it for a loop.

Or, it could be possible that heat is the main reason for the wild power swings, since in the first and third test runs the panel stays stable for about 15 minutes before starting to go all over the place.

There’s a chance the panel technology is a culprit. We noticed this same all-over-the-place power output pattern from other products with a similar look to the panel cells (e.g. the Foxelli charger), which often indicates a shared supplier or factory.

BigBlue 3 28W

Bottom line: The 70 BigBlue 3 28W is a large, high-quality panel, with extremely clean power output that correlates tightly with sun input. You can see how clean the power and efficiency plots are for most of the tests and how rock solid the power output stays during full sunlight conditions.

The build quality for this panel is good but not exceptional, as it’s the standard polyester cover with embedded metal rings. It seems to have stayed cool enough, even in the summer Texas sun, to stay stable and efficient. We didn’t see any bubbling or other damage from heat.

The main downsides to this panel are size and weight. We included it because we saw many other people considered it just under the limit for a backpack-portable charger. In exchange for its higher weight, this panel does extremely well in lower sunlight conditions. The BigBlue did far better in moderate sunlight than any other panel in this roundup, getting up to 8W in conditions where the other panels would’ve struggled to produce 4.5W.

Test notes: For most of the runs, we had the load tester set to draw 2A of current, which the charger stayed close to at a steady 4.9V.

For the “bigblue-3” run, we had the tester try to draw 3A. The charger put out well above 2A for most of that run, and even got all the way up to 2.5A — above its rated 2.4A maximum — for a little while.

Like the power line graphs, the power and efficiency scatter plots are exceptionally clean, and reveal that this is one of the panels where efficiency drops a bit as the sunlight level maxes it out and the power output plateaus.

CHOETECH 19W

Bottom line: The 55 CHOETECH 19W is exceptionally lightweight and compact for the amount of juice it produces, coming in under a pound. We have no complaints about the overall build quality, and we appreciate that there’s not a lick of extraneous material to weigh it down. Excellent performance at a great price in a compact package.

The output from the CHOETECH charger was very stable under all sorts of conditions, holding steady during periods of ideal sunlight and correlating tightly with dips and rises from passing clouds. We were able to get a sustained 4.5V at 2A for a steady flow of 9W of power to one of this two USB outputs when the weather cooperated.

This panel has one integrated metal ring in the top, and then loops along the side. These woven loops are the price of not wasting space on the cover, though. If it has integrated rings, it would weigh more because they would have to expand the amount of extra case material all the way around to accommodate them.

The one slight downside to this panel is the efficiency — you need to get north of 600 W/m2 (a moderately sunny day with a good panel angle) in order to see the full power output. It just doesn’t do as well at lower sunlight levels than some of the other, heavier panels do. This definitely related to its smaller size.

Test notes: The Choetech gave us really clean panel output for two of the runs, when we were trying to draw 2A from it. When we tried to draw 3A in the last run, there was a little bit of instability at a few points. Our guess is that this instability was related to heat buildup from the very high levels of sunlight and the increased power draw.

If you look at the chart for the test run choetech-3, you can see that the panel is fine until about 30 minutes into the test, when it starts wigging out. Then after a spell of Cloud cover and low wattage from 00:48 to 1:05, it regains its stability for about 10 minutes before losing it again towards the end. This is about what we’d expect if the very high amount of incident sunlight (north of 900 W/m2) and power draw were causing excessive heat buildup. Unfortunately, we didn’t snap a picture with the FLIR on this run, so we can’t say for sure how hot the panel got at peak.

Foxelli Dual USB Solar Charger 10W

Bottom line: The 45 Foxelli Dual USB 10W is one of the more compact and lightweight units we tested — and also one of the least stable. It bombed pretty hard on the 2A runs, which we can’t hold against it because Foxelli only claims 1.85A max. But we found instability even down to 1A. It did, however, manage a respectable 4.8W average on a cloudless version of that run.

To compare it directly to a similarly-sized competitor, the Choetech, it weighs slightly more and produces about half the power. Not good.

The difference in weight and performance probably comes from the different make of the panels. The Foxelli has a type of panel that in our tests seems to be associated with lower stability under heat, and sure enough you can see that in some of the test runs.

Test notes: In the first run, it started out steady and then went crazy at about the 40 minute mark, with the power fluctuating wildly. On a subsequent run with more sustained sunlight it did better. But on the third run it just went nuts. That third run was the hottest (96F, vs. 80F and 90F on the other two), and the FLIR measured the panel at 110F near the end of the test.

Goal Zero Nomad 14 Plus – (Discontinued)

Bottom line: Goal Zero is a major player in the off-grid energy space, and we own and use many of their products. But the 150 Goal Zero Nomad 14 Plus just did not deliver. It’s expensive and heavy, and the output won’t stay stable enough to be usable at anything over about 1.5A of current. The 4.8V at 1.49A (~7W) that it would actually stabilize at is just not even close to good enough, even if it were as inexpensive as one of the other panels.

But at over 3X the price and almost twice the weight of our top pick, there’s just no case for this panel that we can see.

We worked with Goal Zero’s support, thinking we may have received a bad unit, but the results were the same after they sent us replacement junction boxes. We then shared our results with one of their engineers, who suggested we retest at a 1.5A draw — that did produce more stable results, they just weren’t very good results.

Goal Zero Nomad 7 Plus – (Discontinued)

Bottom line: Everything we said above about the Nomad 14 Plus applies to the 80 Goal Zero Nomad 7 Plus, but even more so. For the price and weight, just about every other charger in this guide absolutely wrecks the Nomad 7.

One of The Prepared’s testers even had this same model from a few years ago in their personal preps, and as a result of this review, they’re throwing it out.

We tested at a little over 0.5A current, which is the most we could get out of the Nomad 7 in the full Texas sun and still keep it stable. So this was a 2.6W panel under ideal conditions, placing it dead last in raw power output. Even when you account for the smaller size than the rest of the panels in this review, that’s just not good enough.

iClever USB Solar Charger – (Discontinued)

Bottom line: We liked the build and compact design of the 60 iClever USB Solar Charger. It comes with an integrated 8000mAh battery that cannot be removed, which we generally dislike and makes the testing harder. When we eyeballed the panels up close, they look like the same panels in other products that performed well in our testing.

In a future iteration of this review, we may include more chargers with built-in batteries and develop a different testing protocol. The iClever’s battery performed fine in these tests, however, with a very solid 4.8V at 2A.

Nekteck 21W Solar Charger

Bottom line: The 40 Nekteck 21W was one of the standout chargers, and it’s very close in design, size, and performance to the Choetech. These two panels are closely comparable, but while the Choetech’s performance is better, the Nekteck’s design is slightly more versatile and durable — it has a flap with three embedded rings on one end, a two embedded rings on the USB port end.

For the weight, price, and performance, it’s clearly at the top of the heap. For just 40 this charger is a fantastic value.

Test notes: The Nekteck’s power output was extremely clean and stable over all the runs, and it matched the sunlight level closely. For the third run, the irradiance meter wasn’t recording, but the sky was clear until around 3pm, when the power output started to drop steadily with a few dips.

RAVPower Solar Charger 16W Solar Panel

Bottom line: Avoid the 50 RAVPower 16W Solar Charger. We never could get this compact charger to stay stable at 2A, and it underperformed even the Foxelli charger by most metrics.

The RAVPower claims a 5V and 2.4A output, but we never saw output even close to that in our testing. The panel was able to keep the voltage at one of its two USB ports between 4V and 5V pretty consistently, even going over 5V by a decent margin on a few occasions. But the amperage was all over the map, swinging between a little under 2A and zero.

This charger just couldn’t keep enough current coming consistently to break 4Wh under a 2A load. However, if we dial the load back to 1A, we start to get more stability and the charger gets up to 5W consistently.

Looking at the brief periods in the test runs where it did well plus the less-formal spot checking we performed, where we watched the meters for a few minutes but didn’t record, we could see maybe getting this panel up to 7W sustained under absolutely ideal sunlight and load conditions. But even then, it’s not going crack the top 5 in its weight and price class.

Test notes: The second test run of this charger is the only one we saw in this whole review where the unit is clearly having problems getting back up to its power output after a Cloud passes. You can see that it’s unstable for about 10 minutes after it’s plugged in, and then that instability returns every time the sunlight level dips due to Cloud cover. As for the first run, there was a lot of instability, which really hurt the charger’s average power and total Wh output over the course of the run.

Renogy Portable E.Flex Monocrystalline 10W – (Discontinued)

Bottom line: We loved the 30 Renogy E.Flex 10W charger and some of our testers bought a few for their families. The build quality feels insanely sturdy, with the possible exception of the hinges (if squished flat by a heavy weight) and the little plastic box on the back for the USB port, which protrudes in a way that might make it prone to snap off in a pack. But otherwise it feels like a tank, which is amazing considering that it’s only half a pound.

The Renogy scored really high efficiency numbers for its compact size category, and its close to a 5W panel on a good day. It’s sensitive to load, though, so it wasn’t until we dialed the load back to 1A that it reached peaked efficiency.

It stands out for staying stable and continuing to charge even at fairly low sunlight levels. Even under Cloud cover, this unit can still put out a clean trickle charge, which is not something we saw with the other smaller panels (or even in some of the larger panels).

Ryno Tuff Solar Charger Dual USB 21W

Bottom line: The 57 Ryno Tuff Dual USB 21W unit came out on top in power output, watts per ounce, and price. It was a great performer in every area, and though it wasn’t quite as stable on all the test runs as its closest competitors, overall it out-delivered everyone else.

Test notes: The first two test runs showed this charger doing really well, and it’s clear that it would have scored an average of over 9W of output if the weather had cooperated.

There was a period of instability in the middle third of the second test. This may be related to heat buildup, but it’s hard to say. The third test run was done with a 3A load, and you can see that it’s significantly less stable than the other two that were done at 2A. This instability under a higher load is something we’ve seen in a few of the panels, and as in the other cases, we think the cause is probably heat-related.

Solar Camp 5V 7.6W

Bottom line: We couldn’t get much power out of the 100 Solar Camp 7.6W on any of the runs where we set our 2A load to perfectly match what Solar Camp claims its port delivers. The charger would not stay stable over the course of any of the 2A runs, and the current just swung all over place.

We finally started seeing some real results when we lowered the draw to 1A. We did a very short run where we were able to get as much as 4.9W out of the panel at irradiance levels of 800W/m2 and higher. If this charger could sustain that kind of output for a longer 1A test run, then that might put this in the running with the Renogy in terms of watts per ounce. But even on a one-hour 1A run where we simulated a clear day by removing the Cloud cover from the dataset, the power still swung around a bit and we ended up with 2.7W average.

Ultimately, even though the Solar Camp is lighter and is capable of 4.9W output for short stretches under ideal conditions, we still don’t think it’s really in the same class as the Renogy for two reasons:

• The Renogy’s build quality is off the charts, especially compared to the thin, flexible Solar Camp.
• The Renogy is dramatically cheaper, especially if you get it on sale.

The Solar Camp’s performance may come down to the fact that it is is using a panel design that’s different than anything else in this roundup. You can see from the photo that the panels have a different look to them, and they’re on a thin, flexible backing.

Solar Camp advertises this package as lightweight and waterproof, and while we didn’t test the latter claim this time around, it’s probably valid. This is a very compact charger for the number of panels and total panel area you get. We loved the design and the build. Unfortunately, the performance just isn’t there in our testing.

Test notes: In the first test run, there was one roughly 15-minute stretch where this panel sustained about 2A. But the rest of the time on all the runs the current alternated between zero and 500mA, while the voltage stayed between about 4V and 5V. We have no idea why or how this happened, but have followed up with them to see if we can’t improve on this in a future review.

We did a subsequent test at 1A and got much better results, but it’s still not enough to get this charger into our main recommendations.

SunJack 15W

Bottom line: The 80 SunJack 15W is an expensive and moderately heavy panel. The build quality is similar to the Renology charger that we liked: hard plastic and built like a tank. But in terms of power output, it just didn’t blow us away like we had hoped when first pulled it out of the box.

We tested at a variety of attempted current draws, from 1.5A up to 2.8A, and we really couldn’t get this charger to put out more than 9W. We wish we had been able to test on some days with long stretches of over 950W/m2 of irradiance because we suspect we may have seen north of 10W with the right load. But that didn’t happen, and regardless, this didn’t do any better than much lighter and less expensive chargers.

The model we tested does come bundled with a removable 10K mAh rechargeable battery bank that seems decent. Since testing, SunJack has released a model that doesn’t come with a battery and is 20 cheaper, allowing you to pair with a bank of your own choosing.

X-DRAGON 14W SunPower – (Discontinued)

Bottom line: The 40 X-DRAGON 14W is a really great, compact, two-panel charger. It’s lightweight with solid build quality and impressive performance for the size. You’re not going to get a ton of power out of this charger, but under good conditions you can sustain well over 5W, which is quite good for a sub-1-pound panel. This panel was very stable, and it tracked changes in sunlight with near-perfect precision.

But ultimately, as much as we liked this panel, we’d rather either add an ounce and a half and get one of the more powerful chargers like the Ryno Tuff or Choetech, or go all the way down to the Renogy to really save weight. Based on our current numbers, this panel just falls into a weird size/performance spot that makes it hard to recommend, despite our love for it.

X-Dragon also offers a three-panel 20W charger— if it performs like this smaller version, then it’s probably a beast. We’re going to try to get our hands on one for the next round of testing.

Test notes: It’s pretty clear from the middle 30 minutes of the second test run that this panel could probably hold a 7W output in the right conditions, but even then that wouldn’t be good enough to crack the top 4 or so by weight and power.

BigBlue portable Solar Charger the Perfect Companion for every Jobsite

USB solar charger are coming in to their own, offering a tiny power plant that can generate power for phones and small electronics when the sun is out, and even to recharge power banks large and small, to save that energy for later.

As an added bonus the newer portable solar chargers fold up for convenience, so you can have something to juice up your devices when you’re out and about.

For construction workers on jobsites with no power or in remote field locations the solution is BigBlue’s Solar Chargers, which are also eco-friendly and wallet-friendly.

The perfect backup

Solar chargers are a great option if you’re working somewhere with an unreliable power grid and the perfect add-on for any emergency kit. The smallest solar charger could charge a phone the size of an iPhone in just a few hours of midday sun.

When combined with a portable power such as a small USB power bank designed for phones and tablets you have a compact, reliable and convenient communications power solution.

With larger battery packs for laptops, and for even larger AC-powered devices you would benefit from a larger setup with a portable power station.

Solarpowa 28W Solar Charger

The smallest BigBlue unit is the 28W solar charger (Original price: 99.99 40% OFF Discount price: 59.99) a foldable solar charger panel bag small and light enough to fit into any backpack, daypack, or emergency kit, with a wide compatibility for attached Micro USB cable for almost all 5V Android devices ad some DSLRs, or Apple devices with their original cable.

The unit features 3 USB Ports (5V/2.4A Max each) with SmartIC Technology, which detects and delivers optimal charging current for your devices using SunPower Solar Panels that elevate solar conversion rate by 24%.

With the Smart Charging Technology, the device recognizes your device and providing optimal charging speed, which varies depending on the devices.

The unit is water and dust resistant, which uses a special PET polymer surface to protect it from occasional rain or wet Fog, and all the ports are covered by a cloth flap and rubber covers to protect them from dust or water damage.

The Solarpowa 28W is ultra-thin and light weight, measuring only 11.1 x 6.3 x 1.3 inches and weighing 1.41 pounds. The foldable design maximises portability and saves spaces, so you can take it anywhere and charge anywhere.

Solarpowa100 Solar Panel

The Solarpowa100 is a 19.8V 100W ETFE Portable Solar Panel (Original price: 199.99 20% OFF Discount price: 159.99) is designed to work with most battery power stations on the market, and includes 1 SAE Connector to DC 5.5×2.5mm Cable, 1 SAE to MC4 Cable and a 10-in-1 adaptors.

This special ETFE solar surface delivers high fire resistance, excellent solar transmittance, and self-cleaning nature. It also helps protect the solar cells from fading and splitting.

For high-energy conversion, the ETFE one piece lamination transparent material technology increases conversion by 5%, which means that it can offer a conversion up to 23%.

The BigBlue ETFE Technology also enables the unit to meet IP65 waterproof standards, which means you can use it outdoors on light rainy days.

Being foldable and portable, with integrated handle, ultra-thin design, with sturdy materials make the Solarpowa100 easy to carry and extremely portable and durable.

The unit can also be connected in Series and Parallel to increase voltage and current.

BigBlue 150W Solar Panel with Kickstands

The BigBlue 150W solar panel (Original price: 259.99 23% OFF Discount price: 199.99) provides safe and efficient solar power using Monocrystalline solar panels which have the longest life span and tend to perform better than similarly rated polycrystalline solar panels especially in low-light conditions.

With PD 60W and Quick Charge technology devices can be powered faster than conventional charging, allowing you to spend less time for full charging.

Designed for rechargeable 12V batteries, such as those used in boats and RVs, makes the panels ideal for off-grid power, and for emergency back-up.

BigBlue panels also offer higher efficiency to produce more energy with less space than other brand’s lower efficiency models.

Strong kickstands are built in so the solar panels can be easily angled towards the sun to catch more sunlight for efficient charging, and the waterproof and durable fabric design is suitable for most any outdoor activity.

The 5 Best Solar Powered Chargers for Your Phone or Tablet

We all know the sudden drama that happens during our outside pursuits when we see a “low battery” warning on our phone, tablet, digital camera or other device. Outdoors you’ll find yourself many times far from any power outlet to recharge your devices.

What will you do then? Have you ever considered carrying with you a solar powered cell phone charger?

Whether you’re on a camping trip, mountain biking, traveling the world or just walking around town a portable solar charger can help keep your devices powered up anywhere under the sun.

The idea of portable solar gear that uses free off-grid solar energy to power up our mobile lifestyle is pretty amazing. It’s surely one of the best inventions of this century.

Solar battery chargers come in many different shapes, sizes and efficiency ratings. We’ve done the hard work already and picked the top five solar powered chargers available right now for sale on Amazon that have the latest photovoltaic (PV) technology and the best charging performance.

We have also included a buyer’s guide at the end of the article where you’ll find everything you need to know about choosing the best solar charger, so make sure to check that out as well.

Best Overall: BigBlue 24W Solar Powered Charger

The BigBlue 3 USB ports 24 Watts solar charger is our top pick for the best solar phone battery charger to buy in 2022 because it offers a remarkable combination of manufacturing quality, price, portability, and charging speed.

It features highly efficient energy conversion SUNPOWER solar cells (up to 23 percent efficiency) and SmartIC technology, which means that this charger will automatically recognize the charging protocol of your devices so that it can deliver the most suitable and fastest charge possible. Three USB ports allow you to plug in and split the current between 3 devices at once.

What makes BigBlue the best portable solar charger for almost any kind of environment is also its charging performance in diverse weather conditions. This charger delivers a steady energy flow even on cloudy days so you can confidently plan your outdoor activities without having to worry about low battery devices.

The BigBlue solar panels delivers 24 Watts under direct sunlight and it charged our iPhone 11 from zero to full in about two hours. During cloudy days the charging capacity varies according to the Cloud exposure, but it should be able to charge anywhere from 20 percent and above which will be very useful especially in emergency situations.

This solar charger is made of four SunPower solar panels sewn into a durable canvas and a fifth section that’s more like a small pouch for storing your iPhone or Android phone while charging and thus protecting them from the direct sun exposure and overheating – however, if you have a cable long enough, it’s always better to move your devices into the shade. You can also easily store all the cables in this department.

Inside the pouch there are three USB ports that deliver up to 2.4A per port or 5V/4A overall (depending on how much direct sunlight hits the solar panels), and a small LED that indicates when there is power flowing from the panels.

What about portability? The BigBlue solar powered charger weighs 754 grams or 26.6 ounces and the entire solar charger folds up to about 14 millimeters or 0.55 inches thick. This makes it perfect to carry around when traveling, backpacking, going to work, or school.

To get the most out of your portable solar gear, we highly recommend pairing the BigBlue charger with a USB battery pack. For example, the Anker PowerCore Elite 20,000 mAh power bank is fully compatible with the BigBlue 24W solar charger and it can store enough energy to charge an iPhone 11 from zero to full six times. A portable battery pack like this one is a must-have since the solar chargers themselves cannot store energy and provide it during night time when the sun is not around. With a charged power bank, you are powered up 24/7.

What we like:

• Great value for the price
• The SmartIC technology
• Amazing charging speed
• Three USB ports
• High quality material
• Very compacted when folded

What we don’t like:

• Removable USB hub would make packing better
• A charging cable for iOS devices could be included

The Lightest and Most Flexible: Portable Solar Panel Sunslice Fusion Flex 12

Sunslice Fusion Flex 12 Watts with two USB ports (5V) each with max output of 2.4A is a perfect option for those who like to FOCUS on their outdoor experience without worrying about maintenance of the devices they bring along.

Two portable solar panels are extremely lightweight (just 270 grams/9.5 ounces) and easy to fold into a thin A4 like shape. That’s it, you can head out now! Then you just open the pack for solar cells to face the sun and use right away on the go by plugging in your USB devices like a smartphone and/or tablet. Additional plus are two elastic fasteners and two carabiners you receive with the product to easily attach the charger to your backpack.

The solar panel is made off CIGS thin film solar cells, which are a versatile option when it comes to application and practical use of photovoltaic technology. The thin film is flexible, you do not have to worry about bending the panels to fit better in your backpack. According to the manufacturer, the solar cells reach up to 16.5% efficiency in the perfect sunny conditions. Thin film solar cells perform better than crystalline solar cells when exposed to the strong summer sun, they maintain better power production when their surface heats up – this happens quickly on hot days. On the other hand, in colder weather, their performance drops compared to monocrystalline cells.

When it comes to performance under cloudy conditions or during the days when clouds come and go, you may need to carry a power bank with you rather than relying solely on this solar charger. The current drops pretty fast when shaded and takes couple minutes to restart once again. This means it may not provide enough power to charge your phone on cloudy days.

The manufacturer thought of the practical use for adventurers by designing the product with the protective and light transmitting EFTE coating – therefore, it doesn’t affect the efficiency of solar cells. The coating feels to the touch pretty much the same as a material of your backpack, yet it is scratch proof and has somewhat self-cleaning properties. Additional advantage is water resistance.

Sunslice Fusion Flex 12 is a practical and durable solution for spontaneous, short trips when you don’t know where and through which terrain your steps will lead you. On a sunny day, all you have to care about is your experience, meanwhile, this solar charger will be there to give you a bit of extra power to use your devices when they are running low of battery.

What we like:

• Lightweight
• Scratchproof CIGS solar cells
• Great charging speed
• Waterproof
• Flexible
• Easy to attach

What we don’t like:

Best for Price: Hiluckey 25,000 mAh Outdoor Portable Solar Power Bank

The Hiluckey 25,000 mAh had the best performance in the solar power bank category. If you’re looking for a solar power bank, look no further than this one.

It features 4 small solar panels that deliver in total 4.8W under direct sun. That’s the most wattage output you can get out of a solar power bank at this moment. While the solar panels on the BigBlue perform four to five times better than the Hiluckey, the PowerPort doesn’t have its own power storage. When there is no sun, there is no power flowing, so an additional external battery is needed to keep devices charged up when the sun is not around.

The Hiluckey Outdoor Power Bank on the other hand, has a built-in battery pack with a capacity of 25,000 mAh which can store enough energy to charge an iPhone 7 about three times and has two USB ports to charge your friend’s smartphone in the same time.

The built-in battery can be recharged by sunlight, but also by wall outlet. It comes with a built-in flashlight and four LEDs that indicate battery life. The casing is shock-proof, dust-proof and water resistant. Great for outdoors

The only drawback of this solar power bank is the charging speed from the small solar panels. In full sun, the Hiluckey built-in battery could reach just 15 percent battery after three hours. However, the charging speed from the built-in battery to our iPhone 7 was very similar to the BigBlue.

We recommend to always charge the power bank by wall outlet before heading outdoors. This way you’ll have enough power to recharge your devices several times, regardless of weather or time of the day. The solar panels on the Hiluckey are not designed as the primary source of charging, but they are a very good alternative to add extra power to the power bank anytime you’re under the sun.

What we like:

• Great value for the price
• High-capacity 25,000 mAh battery
• Overcharge protection
• Two USB ports
• High quality material
• Very compacted when folded
• 12-month warranty

What we don’t like:

Versatile Solar Phone Charger: Neckteck 21W

No matter what environment you’re dealing with, the Neckteck 21W is the Range Rover of solar power chargers. With an ultra-portable design, this solar charger with two USB ports is IPX4 waterproof, dust-proof and shock-resistant. The whole pack weights a little over 17 ounces (approx. 480 grams) and is super easy to use without any worries about your devices.

This charger features a solid construction and three monocrystalline solar panels based on innovative SunPower Maxeon technology that reach the maximum efficiency of up to 23 percent. The solar panels provide 2.0A per port or 3.0A max in total to charge your devices on the go. As other good quality solar chargers, it protects your devices from over current and overcharge, which could damage them if this feature were absent.

A great advantage of this handy solar charger is its compatibility with the most USB devices. It charges great variety of smartphones, which is not always the case with portable chargers. The package doesn’t come with cables. Do not forget to bring your own.

We would recommend it for charging your phone on a sunny day. An impressive feature unique to this solar charger is quite nice charging speed it provides when in the direct sun. In good sunny conditions it works flawlessly and can charge your phone as needed.

However, to get the best outcome when the weather is not perfect or when hiking through shady areas like in a forest, you should consider using this solar charger to charge a portable power bank and use the power bank to charge your phone later. The results are better this way, as the charge interruption recovery is on a slower side.

What we like:

• Great value for the price
• Monocrystalline solar cells
• Two USB ports
• High quality material
• Great for charging variety of smartphones, tablets power banks

What we don’t like:

Best Solar Panel to Charge a Power Station: Goal Zero Nomad 20

This amazing device boasts an impressive charging speed that performs very similar to the BigBlue Solar Charger.

Goal Zero Nomad 20W uses industry leading monocrystalline photovoltaic solar cells to offer a Rapid and steady charge during unobstructed sunny conditions and can bring a smartphone to full battery in less than two hours. This 20 watt solar charger is compatible with most small and medium devices, but can even charge a laptop in approximately 6.5 hours when under direct sunlight (the time is dependent upon the conditions).

The three solar panels are waterproof, UV protected, and scratch-resistant, offering you a durable and reliable portable power anywhere you go. The set comes even with a kickstand, allowing you to position the panels to reach their best potential when you need them to. Although the Goal Zero solar chargers are a bit on the pricier side, they do well when you need to charge smaller portable stations for storing extra power. It is compatible with a reliable Goal Zero 200x power station, which will safely charge your laptop, camera and other latest USB-C devices.

Weighing 2.26 pounds (1,000 grams), the Goal Zero Nomad is not as lightweight as other solar chargers we mentioned earlier, but it’s still a compact charger that can fit just about anywhere. When folded, it occupies pretty much the same space like a small laptop. Because of its reliability and power, this portable solar charger is frequently used by mountaineers in their expeditions.

What we like:

• Amazing charging speed
• Overcharge protection
• Compatible with laptops
• High quality material
• Very compacted when folded
• 12-month warranty

What we don’t like:

Most common uses of solar chargers

In the hectic world of today most of us cannot imagine our lives without gadgets. And the more advanced they get, the more power-hungry they become. That’s when a portable solar charger comes handy. Think of it like having your personal power supply, anywhere you go.

Complete freedom from power outlets!

Solar chargers are lightweight, foldable and easy to carry around. All you have to do is position the solar charger under the sun and it will immediately start recharging your devices. You can even strap it on your backpack and power up on the go. This way you can enjoy your daily activities without rushing to look for a power outlet somewhere inside.

Considering the fact that solar powered phone chargers are now so much more affordable and efficient, they can be a life-saver in many situations.

Solar energy brings light to our unsustainable developing world and by going solar, be it portable or not, is a great way to join the climate change battle by reducing your carbon footprint.

Important solar charger considerations

The most important features you should look for when choosing a portable solar charger are:

#1 Charge Interruption Recovery

Chances are you won’t be able to use your portable solar charger in full sun all the time. Especially if you live in a place like the United Kingdom. Areas with shade or clouds will affect the performance of your solar phone charger to a certain extent. We measured the output power of each model in full sun, and then in fairly cloudy conditions for one hour each in order to see which solar charger recovers the fastest and gets back on track after being shaded.

The best performing models in this category were the chargers with the most wattage power like the BigBlue. The Neckteck 21W scored the lowest in this test because of the small wattage power.

Larger solar chargers have more solar cells exposed to the sun simultaneously and this makes it easier to recover to maximum output after an interruption.

#2 Charging Speed

Most of the time, portable solar chargers are being used to charge devices such as smartphones, tablets, camera batteries, etc. when source of electricity is not available. This is the reason why we decided to test the charging speed of our solar chargers with an iPhone 7 and see how much it can charge from zero of full in direct sun.

To our surprise we found that the charging speed performance of our models was very different. This significant variability is clearly because of the wattage output power, but also due to type and quality of solar cells.

The winner in this category, the Goal Zero Nomad 20, outperformed the competition with an impressive charging speed.

Our advice: If you are looking for the fastest charging speed, choose a solar charger with at least 15 watts. While smaller panels are more lightweight, the charging speed of a 5W solar charger for example, is around three to four times slower than a 15 watts charger.

#3 Weight and Portability

The ideal portable solar charger would be light, small and easy to carry around. The most lightweight model in our competition is the Hiluckey 25,000 mAh Outdoor Portable Solar Power Bank, weighing just 11.8 oz. This is the only model to get a 10 out of 10 in this category.

However, keep in mind that small wattage chargers are less powerful, so if weight is not extremely important to you, we highly recommend choosing a charger with a higher wattage than the Hiluckey model.

#4 Durability

Since they are used mainly outdoors, solar chargers are constantly exposed to the elements, so durability is a very important factor. All the models we tested had more or less the same quality of material and stitching and all panels were weatherproof.

Solar technology is advancing very fast and companies have already integrated the most advanced features found in residential solar systems into portable solar panels as well.

Watts, Amps, and Milliamp Hours (mAhs)

These are the three most common terms and features that are worth considering when when looking to buy a solar powered phone charger.

mAh – Milliamp hours is the easiest way to measure the strength or capacity of a power bank. This term is not used for the panels themselves, but just for batteries. The higher the mAh, the more power it can store and therefore the longer the power bank will last.

Amps – Amps on a solar charger will determine how fast the electric current flows in order to charge up your devices. The current drawn is different from device to device but in the case of portable solar chargers, you’ll get between one and three amps. The solar chargers we picked in our review test feature the highest amp power available on the market right now.

Watts – Watts are a measure of how much energy is being released to charge your devices. It’s the result of multiplying voltage by amps and they are the most frequently mentioned unit of power. Since USB ports operate at approximately 5 volts, a single 2 amp USB charger port (for comparison: a laptop usually has 1.5 amps in a single USB port) for example, would have a wattage rating of 10W (5 x 2) and therefore would require a 10W panel to charge at 2 amps. But in reality, a 10W solar charger won’t produce exactly 2 amps USB charge because of imperfect weather conditions (Cloud cover) and type of solar cells.

Types of portable solar panels

Solar chargers can either feature monocrystalline, polycrystalline or the super lightweight CIGS panels.

Monocrystalline PanelsMonocrystalline technology is the one that started the photovoltaic revolution and it’s still the most efficient even today when it comes to converting solar energy into electricity. As the name suggests, monocrystalline panels are made from a single crystal of pure silicon. They have an efficiency rating of up to 22 percent and can be easily recognized by their black uniform cells.

Polycrystalline PanelsUnlike monocrystalline panels, the polycrystalline modules are made up of multiple crystals but still deliver a great efficiency of up to 17 percent. Polycrystalline panels have a blue color and they usually cost less than monocrystalline panels.CIGS PanelsCIGS panels consist of Copper, Indium, Gallium, and Selenide solar cells. They are very different than mono- and polycrystalline panels. These panels are the most flexible and lightweight, but also the less efficient out of the three types in converting sunlight into usable power. It’s a good option for backpackers or trekkers who want to travel ultra-light. These are not as durable as the monocrystalline modules but they still do a pretty good job in case of emergency.

Do you need an external battery, or is a solar charger sufficient?

Portable solar chargers can recharge your devices – but only in direct sun. If you want to recharge your smartphone during night time, or on a rainy day, the solar panels will not be of any help.

On the other hand, a battery pack like the Anker PowerCore Elite 20,000 mAh, can store energy and provide continuous and steady power to recharge the same devices you would charge with solar chargers.

Thanks to modern technology battery packs nowadays are very light and can be recharged by solar panels or wall outlet and they can store a lot of energy, enough to recharge a smartphone up to seven times in one go.

Since battery packs can be charged from solar panels as well, adding one to your solar kit means you can have power for your electronic devices available at any time – even when the sun is not there.

How to get the most from your solar charger

Simplicity makes solar power truly remarkable. The only care and maintenance most solar chargers require is making sure they’re clean and dust free. A moist cloth should get the job done most of the time.

To get the highest charging efficiency, it’s important to position your solar panels correctly. A good rule of thumb is that the angle, relative to flat ground, must be approximately the same as your latitude, with a few small adjustments according to the seasons (shallower in the summer and steeper in the winter time).

The Best Solar Chargers of 2023

Cory Gunther / How-To Geek

Sydney Butler

Sydney Butler Writer

Sydney Butler has over 20 years of experience as a freelance PC technician and system builder. He’s worked for more than a decade in user education and spends his time explaining technology to professional, educational, and mainstream audiences. His interests include VR, PC, Mac, gaming, 3D printing, consumer electronics, the web, and privacy. He holds a Master of Arts degree in Research Psychology with a FOCUS on Cyberpsychology in particular. Read more.

Elizabeth Henges Commerce Editor Elizabeth Henges is the Commerce Editor for How-To Geek. She has close to a decade’s experience reporting on tech, gaming, and gadgets. Elizabeth has had her commerce work featured on XDA Developers, The Inventory, and more. She has also written for publications The Washington Post and The Verge. Read more. About How-To Geek

Whether you’re dealing with an unreliable power supply or want to make sure you can charge your essential gadgets when far away from the grid, a solar charger is an essential part of your hiking, travel, or emergency kit.

Amazon 30.99

Amazon 39.99

Amazon 149.95

Amazon 72.96 79.99 Save 9%

Amazon 39.99 42.99 Save 7%

How-To Geek’s product recommendations come from the same team of experts that have helped people fix their gadgets over one billion times. We only recommend the best products based on our research and expertise. We never accept payment to endorse or review a product. Read »

24 Models Evaluated

5 Hours Researched

24 Reviews Analyzed

What to Look For In a Solar Charger in 2023

Before we get into what makes for a good solar charger, let’s clear up what we mean by “solar charger” since it’s distinct from concepts like a “solar power bank” or “solar panel.” A solar charger is a device that converts solar power using solar panels into an electric current suitable for charging devices, usually in the form of a USB power port conforming to USB power specifications. Solar chargers typically don’t have any power storage of their own, but you can use the charger with a power bank of your choice. In general, putting a lithium battery in direct sunlight is not a good idea, so it makes sense that most solar chargers don’t integrate them. Instead, you’d use a lengthy cable to connect devices under shade or in your bag, protected from direct sunlight. It’s important to use a solar charger with the necessary safety circuitry to prevent device damage. In models with poor safety controls, too much voltage may go to the device, damaging it. The charger may also keep pushing charge to the device even though it’s full. So look for mention of overcharge protection and other similar features. If you do use a charger that doesn’t explicitly mention these features, it’s usually a better idea to charge up an inexpensive power bank, rather than charge your tablet, phone, or other devices directly. Then use the power bank to charge your devices in turn. Size, weight, and mounting features are other key considerations. Small, foldable, and light solar chargers are more common now. Despite their size, they can produce usable amounts of power thanks to advancements in solar panel efficiency. Chargers may come with backpack mounts, kickstands, frames, or other mounting solutions. It’s best to pick one that matches your use case. For higher-capacity chargers, it’s always nice to have multiple ports to charge several devices simultaneously. Weatherproofing is a must since the odds of it raining at some point are virtually assured. Finally, an oft-overlooked feature is “auto resume.” Many solar chargers will stop charging when the sunlight drops below a certain level, and then fail to resume unless you manually reinsert the charging cable. Chargers with auto-resume ensure you don’t come back after a few hours to find that your device stopped charging ages ago.

Frequently Asked Questions

Solar chargers don’t store energy, and they need sunlight to produce electricity, so sadly, you can’t use them without sunlight.

Yes! Even if it’s cloudy or overcast, you’ll still get power from the sun. Things may not charge as quickly, but there’s still plenty of usable light.

In theory? Yes. In practice? Apart from the flashlight putting out a low total amount of power as light, it’s not in the same spectrum as sunlight, and it would be so inefficient that there’d be little point.

It all depends on the peak wattage of the charger in question and how much sunlight you’re getting. Under good conditions, it’s totally possible to get the same charge rate as typical wall chargers.

Best Solar Charger Overall: Anker 24W 3-Port USB PowerPort

Anker has developed a reputation for affordable gadgets that perform better than they have any right to. The PowerPort Solar is a great solar charger, even more so for its low price point, and it’s the one we recommend most people in the market for one of these devices to look at first.

Let’s get the negatives out of the way first, because if they’re dealbreakers for you, it’s best to know them upfront. First, there are no USB-C ports, so you’ll have to keep a USB-C to A cable handy for your USB-C devices. Secondly, this charger is not water resistant, so you’ll have to be vigilant for rain. The panels themselves have an IPX4 rating, but not the electronics box.

If you’re happy with these small compromises, you’ll find a lightweight, foldable, and flexible solar charger with a built-in kickstand and enough power output to charge most phones and tablets at rates similar to wall chargers. Each port can provide up to 12W of power. Considering that common “fast” chargers are 18W and typical iPad wall chargers are also 12W, this isn’t a bad result.

While it would have been nice to get more than 12W for single-device charging, Anker makes up for it thanks to its auto-resume charging if the sun is blocked temporarily. Whether you’re camping or want a backup power solution to keep in your car for an emergency, this is a fantastic choice.

Solar Charger, Anker 24W 3-Port USB Portable Solar Charger with Foldable CIGS Panel for Camping, PowerPort Solar for iPhone 12/SE/11/XS Max/XR/X/8, iPad, Samsung Galaxy S20/S10/S9/S8, and

The Anker PowerPort strikes the perfect balance between price and performance. It’s thin, flexible, and supports multi-device charging with auto-resume if sunlight is interrupted. It’s not 100% water resistant, but in every other way it’s a great deal.