Solar Panel Cost. Commercial
A 10 kW to 2 MW commercial solar panel system costs 1.83 per watt before any tax rebates or incentives. Larger fixed-tilt or one-axis tracking utility-scale systems greater than 2 MW cost 1.06 per watt on average.
Commercial solar installation costs for small and mid-sized businesses range from 43,000 for a 25 kW system up to 175,000 for a 100 kW system. Businesses recover about 45 percent of solar panels costs within the first year through tax credits and rebate programs.
COMMERCIAL SOLAR PANEL COST
Average Cost Before Tax Credits
Solar Panel Cost. Residential
The first step to calculating your solar panel costs is to estimate the system size you need. The average residential installation is 3 kW to 10 kW depending size, location, and energy needs.
below include the Solar Investment Tax Credit (ITC), which reduces your overall costs by 30%. Additional solar incentives and rebates are available from individual states, utilities, and local governments, which further reduce your total costs.
SOLAR PANEL COST CALCULATOR
How Many Solar Panels Do I Need?
The average family uses 11,000 kWh per year and needs 26 to 33 solar panels to power the whole house. One solar thermal panel generates enough energy to power a hot water heater for a family of four. The number of panels needed depends on your location and roof size.
Most states have a solar production ratio of 1.3 to 1.6, which means an 8kW system produces 30% more energy, or 10,600 kWh annually on average. To calculate how many solar panels you need, look at your annual kWh (kilowatt-hours) usage on your utility bills and referenced the table and map below.
SOLAR PANELS NEEDED TO POWER A HOUSE
Average kWh Produced Annually
Table based on 250 watt panels at average solar production ratios of 1.3 to 1.6.
Where you live is a significant factor when estimating how many solar panels you need to power your house. Regions with less sunlight require larger systems to produce 100% of their energy needs.
Using the map below, take the number written in your shaded region and multiply by the estimated size of your system in kW. Then, multiply this number by 0.78 to account for inefficiencies and energy conversion losses.
For example, let’s say you live in Texas with a score of 1700, and you believe you’ll need an 8 kW system. This formula calculates a good estimate on how much electricity (kWh) your 8 kW system will produce annually.
1700 × 8 kW × 0.78 = 10,608 kWh
Below are the rough calculations which estimate the system size needed in each region to produce 11,000 kWh for the average home.
SOLAR SYSTEM SIZE NEEDED TO PRODUCE 11,000 KWH ANNUALLY
Solar Panel Cost Per Watt
Residential solar panels cost 2.53 to 3.15 per watt, with most homeowners spending 2.70 per watt on average before any tax credits or incentives. Commercial solar costs 1.83 per watt on average. Solar systems have ratings based on the electricity produced annually in average conditions.
Solar Energy Cost Per kWh
Residential solar energy costs 0.08 to 0.10 per kWh on average, and commercial or utility-scale solar power costs 0.06 to 0.08 per kilowatt-hour. include the Federal Solar Tax Credit (ITC) and vary drastically based on the amount of sunlight and type of solar panels installed.
SOLAR PANEL COST PER WATT KWH
These figures represent the Levelized Cost of Electricity (LCOE), which is the average revenue per unit of electricity generated that would be required to recover the costs of the solar panels over their life expectancy. Consult with solar installers to calculate savings.
Cost of Solar Panels Per Square Foot
The cost of solar panels to power your house are 4 to 10 per square foot. However, most installers estimate solar costs by the amount of energy needed, at 2.53 to 3.15 per watt before any tax credits or incentives.
Below are cost estimates based on home size. Overall costs depend on the type of solar panels, the size and design of your roof, and your energy needs.
COST TO INSTALL SOLAR PANELS ON HOUSE
Residential Cost of Solar Panels By State
The average cost of solar varies significantly per state but overall is affordable. The local cost of electricity influences the cost of solar per watt in your area. Below are the average per watt and by system size across the United States, including the 30% federal solar rebate.
COST OF SOLAR PANELS BY STATE
Average Solar Panel Installation Costs By Brand
Below are total installation costs for 6kW and 10kW residential solar systems by brand which includes the 30% tax credit. Most solar manufacturers offer similar pricing, however, the price you pay is typically reflective of panel quality.
SOLAR PANEL INSTALLATION COST BY BRAND
include 30% tax credit and reflect installation costs from solar contractors. Total costs depend on the location, installers experience, inverter, and other equipment.
How Much Does One Solar Panel Cost?
One 150 to 300-watt solar panel costs 112 to 450 on average, or between 0.75 to 1.50 per watt depending on the type of panel, energy-efficiency rating, and size. Solar companies that purchase in bulk typically spend 0.75 per watt, whereas homeowners spend 1 per watt.
Most distributors only sell solar panels to local contractors at bulk wholesale prices. Hiring a solar installer will drastically reduce your overall equipment costs. These are for the panels only, additional fees for installation includes inverters, batteries, mounting hardware, wiring, and more.
SOLAR PANELS FOR HOME COST PER PANEL
Solar Panel Lease Cost
A solar panel lease costs 100 per month on average, with most spending between 50 and 250 per month depending on their location and energy needs. Leasing solar panels is cost-effective and typically saves 50 to 100 per month on your electricity bills with little to no down payment.
Solar leasing companies are responsible for the installation and maintenance fees for the duration of your contract. If you decide to move, expect to pay additional charges to end your leasing agreement because transferring the lease to another buyer can be difficult.
If you own your solar system outright that generates 100% of your power, the monthly cost is less than 10 per month for minor grid-tied connection fees. An off-grid system has no monthly costs other than general maintenance.
Tesla Solar Roof Cost
A Tesla solar roof costs 22 to 45 per square foot, which includes the solar roof tiles, a Powerwall, roof and site repairs, and complete system installation. A 9.45 kW solar system installed on a 1,800 square foot roof costs between 39,600 and 81,000.
On average, solar shingles cost up to 8,000 more than installing a new roof with traditional PV solar panels. Glass-faced solar shingles mimic the appearance of a tiled roof and cover more surface area than mounted PV panels to catch more sunlight.
Solar tiles have a lower efficiency rating in producing electricity. They may not last as long as PV panels because their design doesn’t allow much room for ventilation, which can lead to overheating.
Get clean, uninterrupted backup power for your entire home with Tesla Powerwall
Sunrun is helping Americans take control of their home energy. Through Sunrun’s premium Brightbox™ solar storage service, you can now get whole home backup with Tesla Powerwall for as little as 0 down.
Tesla’s Smart home battery, Powerwall, has brought high-quality, renewable energy and backup power to homes and businesses across the country. Tesla Powerwall’s standards are hard to beat, and Sunrun is committed to serving our customers with benefits like free maintenance and repairs.
As America’s leading residential solar and battery storage company, Sunrun is proud to meet your energy needs with industry-leading solar products, superior service, and custom solar and storage plans.
With Sunrun and Tesla Powerwall, a brighter future starts today. Request your free quote to connect with our expert Solar Advisors, so they can help you create a custom solar storage solution to meet your unique energy needs.
Now, you have the option to power your entire home through a blackout. In the event of an outage, your battery provides complete, continuous power and recharges daily when the sun rises.
We monitor your system 24/7. If your solar panels or Powerwall aren’t working at their full capacity, we’ll send an expert over to fix it.
Access power when you need it most. For some regions, Brightbox uses Powerwall to provide electricity during peak demand times, buffering you from high rates.
How does Tesla Powerwall work during an outage?
Your Tesla Powerwall will automatically disconnect from the grid in the event of a power outage and restore power in your home in a matter of seconds. Your rooftop solar panels will continue to recharge your Powerwall until the grid is up and running again.
How many Tesla Powerwalls do I need for my installation?
Just like solar panels, the number of Tesla Powerwalls you need will be determined by your unique energy needs and habits—but for some customers, one Powerwall may be sufficient. Your Solar Advisor will help you evaluate your energy usage to customize a solar system that sufficiently backs up your entire home. Request a free quote today.
How much power does Tesla Powerwall hold?
Tesla Powerwall holds an impressive 13.5 kilowatt-hours (kWh) of usable capacity, with a maximum power rating of 5.0 kilowatts (kW). Usable capacity is the amount of electricity stored in the battery that can be used, while power is the maximum amount of electricity a battery can discharge at one time.
It also has a Depth of discharge (DoD) of 100%, making it one of the most advanced solar batteries on the market today. DoD is a percentage indicating the amount of energy a battery discharges relative to its overall capacity—the higher the DoD, the better the battery.
Where will my Tesla Powerwall battery be placed?
A certified Tesla Powerwall installer will mount Powerwall on the wall, usually inside your garage or outside of your home.
How much does Tesla Powerwall cost?
You can make Tesla Powerwall a part of your home backup plan for as little as 0 down with Sunrun Brightbox. Our monthly and full amount lease comes with worry-free performance and 24/7 monitoring and maintenance. You can also choose to purchase your system through Sunrun.
See which financing options are available in your area and get in touch with a Solar Advisor today.
Can I add Tesla Powerwall to my solar system?
At this time, Tesla Powerwall is only available to new Sunrun customers. We can’t install Tesla Powerwall if you already have an existing solar installation or if it isn’t offered in your area.
What’s the difference between Tesla Powerwall and LG Chem?
Tesla Powerwall offers you whole home back up while LG Chem backs up part of your home. There are also difference in the software and app funcitionality.
Request a free quote to get connected with a Sunrun Solar Advisor and determine which backup solution will best meet your energy needs.
How much does it cost to install solar panels in California?
Reviewed by Adam Graham remodeling expert. Written by Fixr.com.
If you live in sunny California, you may have been considering solar panels for your home. Installing solar panels in California makes sense for many residents. California electricity costs are nearly 10¢ more per kilowatt hour than the national average, meaning installing solar panels can help you save on energy costs. California is also well known for its green initiatives, which encourages homeowners to make greener choices. Solar panels can be a good way for homeowners to create a more sustainable home and lower their bills.
The state average cost to install solar panels before tax credits is 14,460 to 19,260, with most homeowners paying around 16,860 to install a 6 kW system using monocrystalline panels on the roofs of their homes. This project’s low cost is 4,880 to install a 2 kW system using polycrystalline panels installed on a roof. The high cost is 50,000 for a 8 kW system with a full battery backup using monocrystalline panels installed in an array.
Cost to Install Solar Panels in California
|Cost of Solar Panels in California|
|National average cost||16,860|
Cost of Solar Panels in California by Type
Solar panels are installed on more homes in California than any other state because of the high availability of sunny weather and the state’s initiative programs. For those considering installing solar panels, most use a grid-tied system, meaning that the house is still connected to the state’s power supply. In the evenings or inclement weather, you can still purchase electricity.
In some cases, you may want to take your home off-grid, meaning you completely disconnect from the power supply. Because California is so sunny, some proponents believe that going off-grid can and should be done to help lessen the strain on the electrical grid. However, the state has very strict laws about disconnecting from the grid. Most off-grid systems, which use 7 kW at a minimum, are legal, but you need more permits and may have restrictions if you have a large homestead and want to go off-grid with a significant amount of solar power. The average household, which uses 7 to 10 kW to go off-grid plus battery backup, can usually meet the state’s criteria to disconnect from the grid. Check with your local municipality before you begin this project to ensure you do not need additional permits. Below are the average costs of installing both systems in California, based on the needs of the average home.
|Type||Average Cost (Installed)|
Compare from solar panel installers near me
Solar Panel Cost per Watt in California
The cost of solar panels per watt in California is 2.44 to 3.21. Most solar panels have between 250 and 400 watts per panel. Costs vary depending on the solar panel type, number of panels, and installation type. Things like location and if the panels are installed on the roof also impact total costs.
The average home uses around 6 kW to meet its electrical needs. However, you can install a smaller system to offset some of your energy costs or power specific appliances or areas of your home. You can also install much larger systems if you have higher energy needs or want to disconnect from the grid.
The following is the average cost for different systems and the average number of panels you need for a system of that size.
|System Size||Panels Needed||Average Cost (Installed)|
|2 kW||5. 8||4,880. 6,420|
|3 kW||8. 12||7,320. 9,630|
|4 kW||10. 16||9,760. 12,840|
|5 kW||13. 20||12,200. 16,050|
|6 kW||15. 24||14,640. 19,260|
|7 kW||18. 28||17,080. 22,470|
|8 kW||20. 32||19,520. 25,680|
|10 kW||25. 40||24,400. 32,100|
|12 kW||30. 48||29,280. 38,520|
|15 kW||38. 60||36,600. 48,150|
|18 kW||45. 72||43,920. 57,780|
Average Cost of Solar Panels in California per Square Foot
Your home size also impacts the system size and costs. While every home’s energy needs are different, the larger the home, the higher your energy usage usually is. Therefore, larger homes typically need more panels and have more costly installations.
That said, homes of all sizes can use a range of solar panel system sizes. You may have a large home but only want to off-set costs from one or two systems rather than the entire home. Or, you could have a smaller home with higher-than-average energy needs, necessitating a bigger system.
Because many parts of California experience high temperatures, the energy usage in the state from things like air conditioners can be higher than average. For this reason, most homes typically use around 6 kW for their solar panel installations. However, there can be a wide range of costs for each home size. Below are the typical ranges you can expect to pay based on your home size, depending on your typical energy needs.
|House Size||Average Cost (Installed)|
|1,000 sq.ft.||4,880. 25,680|
|1,500 sq.ft.||6,420. 29,280|
|2,000 sq.ft.||9,760. 32,100|
|2,500 sq.ft.||14,640. 38,520|
Cost of Solar Panels in California by Cell Type
Solar panels are available in three basic types. polycrystalline, monocrystalline, and thin film. Of the three, polycrystalline tends to be the least expensive. It is made of multiple small pieces of silicone crystals that are pieced together. The lower cost of this panel type can make them attractive to some homeowners. However, polycrystalline panels are not as efficient as monocrystalline panels. They also have a bright blue color and a larger profile, making them very noticeable on your roof.
Thin film is another less-expensive style. This panel type has a much lower profile than polycrystalline or monocrystalline. However, they tend to be less efficient, particularly in sunny areas like California. They may work better in some northern parts of the state, but they are not recommended for the southern areas.
Monocrystalline panels are the most popular in California, despite being the most expensive. They are made of large single silicone crystals. The larger crystals do a better job of producing energy than polycrystalline panels. The panels are also lower in profile and a sleek black color, so they tend to be less obvious on a roof. Below are the average costs to install a 6 kW system using each panel.
|Cell Type||Average Cost (Installed)|
Labor Cost to Install Solar Panels in California
The price to install solar panels in California has an average cost range per watt of 0.60 to 1.20 a watt. This fluctuates across the state, depending on your location, if you install the panels on your roof or an array, how many and what panel types you install, and the conditions they are installed in. Some areas and locations have higher labor rates than others, while some projects can be more difficult to access, resulting in a higher-than-average labor cost. In addition, larger panels can have higher labor costs than thinner or smaller panels.
The average labor for a 6 kW system is between 3,600 and 7,200. These costs include balancing and racking of the system. Below are the average labor costs for each system installed in California.
|System Size||Average Labor Costs|
|2 kW||1,200. 2,400|
|3 kW||1,800. 3,600|
|4 kW||2,400. 4,800|
|5 kW||3,000. 6,000|
|6 kW||3,600. 7,200|
|7 kW||4,200. 8,400|
|8 kW||4,800. 9,600|
|10 kW||6,000. 12,000|
Which Direction Should Solar Panels Face in California?
It is recommended that solar panels in California be installed facing south to southwest. This gives you the most amount of sun in the day and maximizes the output from your panels. While most solar experts say that having your panels facing the south is the most effective, this may not always be possible for every home. In these cases, positioning them toward the southwest can often be just as efficient and may give you more options and flexibility for how you install your panels. Things like shade, roof slope, and overall location impact the final positioning of your panels.
Get free estimates from trusted solar panel installation companies near me
Cost to Install Solar Panels in California by Location
Most people associate the installation of solar panels with their roofs, but this is not the only place you can install them. You can also install your panels on the ground if your roof is not large enough to hold the number of panels you need or it is facing the wrong direction for the panels to receive the most light.
This is known as a ground-mounted installation, meaning that a large rack or pole mount must be built and installed on the ground to hold the panels. Ground-mounted arrays are often used in off-grid installations because the number of necessary panels is too large for the roof to hold. Ground installations tend to be more costly than roof installations because you need to factor in the extra costs for the larger array.
|System Location||Average Costs (Installed)|
California Solar Tax Credit 2022
While California does not have specific tax credits for residents who install solar panels, the federal government offers a tax credit in 2022 to homeowners who install solar panels this year. This credit value is equal to about 30% of the cost to install your system and is claimed when you file your annual taxes. The credit you should receive on your taxes for a 6 kW system amounts to 4,338 to 5,778, depending on the system cost.
Solar Inverter Cost by Type
Solar panels are only one component of your new system. In addition to the panels, you also need inverters to convert the energy from the panels into usable energy. Several types of inverters are on the market, and the number that you need will vary by inverter type. Solar systems using string inverters will require at least one inverter for the entire system, while microinverter systems require one inverter per panel. Therefore, with microinverters, you need around 20 inverters if your system uses 20 panels.
String inverters work with several panels connected together into a string, and several strings feeding to a single inverter. Most residential systems only need one string inverter. The downside of this system is that a string can go out if one panel goes out.
Power optimizers are not inverters, but they work with string inverters to make the system more efficient. You need one per panel, and they are installed on each panel. They work to keep power optimized on each panel if one panel within a string drops output due to shade or other problems.
Microinverters are installed on each panel and do not interconnect like the string inverters. While they cost less per inverter than string inverters, you need more of them, which increases system costs.
If you have batteries in your system, you need specific battery inverters. These help convert the energy into a type that can be stored by the batteries for later use.
The inverters make up roughly 0.25 to 0.40 per watt of your total wattage cost to install solar panels, depending on the type. Total costs vary depending on the type and how many you need. Below are the average costs you can expect for the various inverter types.
|Inverter Type||Average Costs (Materials Only)|
|Power Optimizer||125. 150|
|Micro Inverter||150. 215|
|String Inverter||1,000. 2,000|
Cost to Run and Maintain Solar Panels in California
Maintain your solar panels properly to ensure they produce the optimal amount of energy and last the longest amount of time. Maintenance in California is fairly simple and includes cleaning the panels twice yearly. During this cleaning, the technician can inspect the panels so that you can be notified in a timely way if repairs need to be done before your energy output is hurt.
The average inspection and cleaning costs in California average 175 to 400 a visit, depending on the number of panels you have and their positioning. This makes for an average yearly cost of 350 to 800 in maintenance fees.
Tesla Solar Roof Cost in California
If you do not like solar panels on your roof or you need a new roof and solar energy, you may want to consider a Tesla solar roof. Tesla solar roofs use a combination of solar and standard shingles of the same shape and size. They install over the entire roof for a more uniform look. This is a good option for those whose current roofs are not in good enough condition to have panels put on and who need a new roof first. By opting for a Tesla solar roof, you get a new roof, a streamlined appearance, and solar energy simultaneously.
The average cost of a Tesla solar roof for a 2,000 sq.ft. home in California is 52,200 to 64,100. This includes a 6.14 kW system along with one of Tesla’s Powerwall batteries, which can help you operate the system longer and save more on energy costs.
Find the best solar panel installers in California
Enhancement and Improvement Costs
Solar Water Heater
In addition to solar panels for energy, you can also install a solar water heater. This system uses energy from the sun to heat the water for your home. The average solar water heater system costs between 8,000 and 10,000.
The cost to install solar panels on a home in California varies by home size, panel type, and system size. The average cost range is 14,460 to 19,260 before federal tax credits for a 6 kW system.
Yes, California has higher-than-average energy rates and problems with their grid resulting in brownouts. The state also gets a lot of sun, making solar energy attractive and eliminating these other issues.
Yes, you need permits to install solar panels in California. The type and number of permits varies by location and project type.
Solar panels increase your property’s value in California. This can also raise your property taxes.
There are no state-based tax breaks, but there is a federal tax credit worth 30% of the total cost of the installation for 2022.
The Public Utilities Commission in the state of California has a program that helps low-income families get free or low-cost solar panels for their homes. To apply, contact the CPUC or your local municipality to see if you qualify.
The information provided by our cost guides comes from a great variety of sources. For more information, read our Methodology and sources.
What Is a Tesla Powerwall and How Much Do They Cost?
If you’re looking to reduce your energy costs, Tesla’s Powerwall is an excellent option.
Readers like you help support MUO. When you make a purchase using links on our site, we may earn an affiliate commission. Read
Tesla is primarily known for its electric vehicles, but they also make solar panels. Once installed, they can provide power for an entire home, but you’ll want a battery to store all that power. The Tesla Powerwall is the battery that stores this power and makes it readily available when required.
Utilizing solar power in a home has various advantages including being both free and better for the environment. Keeping a full battery in your home also provides a backup power source in case of outages.
So how does the Tesla Powerwall work, and how much does it cost?
What Is the Tesla Powerwall?
The Tesla Powerwall is a lithium-ion battery designed for powering a home. It can store the power generated by solar panels and store power taken from the electricity grid.
The advantage of storing power from the grid is that it can act as a backup power source and allow you to charge the battery when power is cheap and use it when it is expensive.
There are currently two Powerwalls available, namely the Powerwall 2 and Powerwall. These products have replaced the Powerwall 1 which was discontinued in 2016.
Both of these products offer significant improvements over the original with the power capacity being increased from 6.4 kWh to 13.5 kWh. The Powerwall is also designed to offer additional power output when the sun is shining.
Do You Need Solar Panels to Use a Tesla Powerwall?
The Tesla Powerwall is primarily used by people with solar panels—but they are not a requirement. A Powerwall can be used solely to store power from the electricity grid but this limits where you can buy one.
Tesla only sells the product to people who purchase solar panels from them. So if you want to purchase a Powerwall for grid usage or use with another solar panel manufacturer, you will have to purchase from an independent retailer.
How Does the Tesla Powerwall Work With Solar?
During the day, the Powerwall takes the energy produced by your solar panels and uses them to power your home appliances. It includes a converter that converts DC power from your panels into the AC power required to power your home.
The energy produced during the day is often more than is needed and this excess energy is used to charge the Powerwall. This power can then be used at night, providing 24-hour electricity. Depending on where you live, you may also be able to sell your excess electricity back to the power grid.
How Does the Tesla Powerwall Work Without Solar?
If you don’t have solar panels, you may still benefit from a Powerwall. Here, the Powerwall is charged by the power grid.
If you live somewhere with electricity that’s more expensive during the day, you can charge the Powerwall by night and then use it to power your home throughout the day. Depending on the difference in rates, this can deliver significant savings.
A full Powerwall can also be used as protection against blackouts.
How Much Power Does a Powerwall Provide?
Depending on how much power you use, a single Powerwall may not be enough to completely power your home. However, if you use a lot of electricity, it’s worth noting that multiple Powerwalls can be added to a single system.
A Powerwall can hold 13.5 kWh of power. This is approximately half of what the average home uses in a day and is more than enough to power a home during the night. If there’s a power outage, it can also last longer if you run fewer appliances.
Continuous Power Rating
The continuous power rating of a battery dictates how many appliances it can run simultaneously. For example, a Powerwall can provide 5.8 kW of continuous power. Depending on the size of your house, this should be sufficient to power your lights, electrical sockets, and kitchen appliances. The Powerwall can also provide 7.6 kW of continuous power when the sun is out.
How Much Is the Tesla Powerwall?
The Tesla Powerwall costs 10,500 when purchased directly from Tesla. If you need more than one, the price goes down with quantity. You can currently purchase two Powerwalls for 17,000. If you’re not purchasing solar panels, you will need to find an independent retailer, and vary.
It’s important to note that while the price above includes installation, it doesn’t include any necessary adjustments to your home. For example, if your electrical panel isn’t compatible, you may be required to pay an additional fee to replace it.
Provided you’re using the Powerwall with solar power, you may be able to get a federal tax credit of 26%. This can make the Powerwall more affordable but it’s only applicable if the Powerwall gets 100% of its charge from solar panels.
Depending on the state in which you live, additional rebates may also be available.
Is the Powerwall Worth It?
The Tesla Powerwall isn’t cheap, and whether or not it’s worth it depends on how you currently power your home. However, if you have solar panels or are about to buy them, the Powerwall is well worth considering. It’s competitively priced, well-designed, and from a reputable company.
If you don’t have solar panels, or you are buying them in the hope of lower energy bills, it’s important to calculate the savings before you buy one. A Powerwall will save some people money, but how much depends on the difference in rates between the day and night.
The reliability of your electrical grid is also worth considering. If you live in an area with regular power outages, you might find the cost of a Powerwall is worth it, even if it doesn’t save you money.
Be Prepared to Wait, Even If You Buy Direct
If you’d like to buy a Powerwall, it’s important to note that they’re not currently the easiest products to buy. If you want to buy direct from Tesla, you need to also order a solar panel. Otherwise, you will need to find an independent retailer and potentially pay more.
Due to the popularity of Powerwall, customers also report significant delays. As of 2021, there was a backlog of 80,000 units and while the current backlog is unknown, you can still expect to wait many months. Tesla also appears to be prioritizing customers who buy direct.
Professional Tesla Solar Roof Installers You Can Trust
Considering a new roof? Get the ULTIMATE in new roof design.
The Tesla Solar Roof offers a beautiful new roof as well as clean solar power for your home. An all-in one solution, a Tesla Solar Roof costs a similar amount to premium roofing tiles plus solar panels.
If you’ve been looking for a solar power option but have been limited because your Home Owners Association prohibits solar panels – consider the Tesla Solar Roof.
With a fully integrated design, Tesla solar roof tiles combine both solar and non solar tiles to create a cohesive look. Each solar and non-solar tile is virtually indistinguishable in color and trim. Your brand-new roof looks incredible from any angle. View our Tesla Solar Roof Project Gallery!
Keep your home cool and comfortable by allowing hot air to vent with high-quality underlayment and integrated air gaps.
Tesla Solar Roof vs Solar Panels
As we’ve mentioned, Tesla glass solar roof tiles are far less bulky than traditional solar panels and are also more durable.
Those aren’t the only advantages of this newer technology, however. and more homeowners have been trying them out and reaping the benefits, and we’ve been hearing amazing feedback:
- Extra home value. If you do decide to sell your home at some point, this modern feature will be eye-catching to prospective buyers.
- Full roof upgrade. These tiles don’t sit on top of your roof–they are part of your roof. So making this upgrade will also give you a brand new roof to enjoy!
- Beautiful design. These tiles aren’t just undetectable as solar pieces. They also come in a few different styles to complement your home.
Tesla Solar Roof Warranty
Made with tempered glass, Solar Roof tiles are more than three times stronger than standard roofing tiles and engineered for all-weather durability. The Tesla Solar Roof installed by AES has a 25-year “No Leaks” Weatherization Warranty. And it’s backed by the level of quality and innovation you have come to expect from the Tesla brand.
How Much Does the Tesla Solar Roof Cost?
The Tesla Solar Roof is a premium roof. You should anticipate a cost of 20-30 per square foot in addition to the solar power capacity at 2.20/watt. Potentially the entire solar roof is eligible for the 30% federal tax credit. The cost is similar to other premium roofing plus traditional solar panels.
To get a firm estimate on your Tesla Roof cost, call us at (770) 691-0966 or send us an email.
Tesla Roofs cost a comparable amount to other premium roofing materials, and you get a roof that can actually save you money year after year. Not only will the Tesla Solar Roof increase the property value of your home, it will save you money on your monthly electric bill and bring you a return on your investment that increases every time the utility raises its rates for decades into the future.
Couple Your Tesla Solar Roof Installation with a Backup Power System
Combine Tesla Solar Roof with a Tesla Powerwall to rely less on utility power and back up your home during a grid outage. Control your system with 24/7 mobile monitoring from anywhere in the world.
AES is a trusted Tesla Solar Roof installer in Clarke County and across the state of Georgia. For a free estimate, call (770) 691-0966 today or click below to contact us online.