Skip to content
10KW Solar System Brisbane | Ideal systems for every budget. 10 kilowatt solar system

10KW Solar System Brisbane | Ideal systems for every budget. 10 kilowatt solar system

    kw Solar System Price. Complete 2023 Guide

    With the price of solar panels plummeting in the Australian markets, an increasing number of homeowners with large homes are taking interest in the 10kW solar power system.

    A 10kWh solar panel system costs 9,473 on average Australia-wide. However, the can go as high as 14,261 and as low as 8,865 depending on the government rebate, installer and quality of panels/ inverted used.

    Before you get prices, you will need to know if you have the roof space, how much the rebate is and whether this is a good sized system for your needs.

    How much does a quality 10kw solar system cost?

    On average, most Australians pay 9,473 to install a 10kw solar system. However, the can go as high as 10,261 and as low as 8,865 after the government rebate.

    You’ll, therefore, pay higher or lower depending on the rebate rates of your state. For instance, Homeowners in New South Wales and Victoria may pay more than homeowners in the Northern territory since their solar rebate rates are lower.

    kW Solar Price by State

    State10kWh Price Installed

    How much power will a 10kw solar power system produce?

    Ideally, a good quality 10kw solar power system will generate 40 – 55kWh daily. However, the 10kw system output is subject to the solar system’s location, the panel’s array tilt angle, and orientation.

    Temperatures and shading may also affect the system’s efficiency.

    The 10kw system output also varies depending on the season of the year. Your 10kw solar power system is more likely to generate more electricity during summer than winter.

    Below is a table of the average daily production of a 10kWh by major cities.

    CityAverage Output (Daily)

    How many panels does a 10kW solar system need?

    A quality10kw solar system requires about 27-34 solar panels. The precise number of panels you’ll need depends on the wattage of each panel.

    If the panels have a 350-watt rating, 29 panels will be enough for your system. However, with about a 300-watt rating or lower, the number of panels needed will also increase.

    To put this into perspective:

    10000 watts / 350 watts = 29 panels

    10000 watts / 300 watts = 34 panels

    How much roof space will I need?

    27 – 34 solar panels mean that you need a lot of roof space. Since most solar panels measure 1.6m x 1m, you’ll need at least 54 – 80 square meters in space, depending on panel wattage.

    If you have little roof space, you can opt for the latest more-efficient panels. They generate more electricity with fewer panels of the same dimension but are more expensive than the regular PV solar panels.

    What’s the government rebate on a 10kW solar system?

    The Australian government’s solar rebate program, the Small-scale Renewable Energy Scheme (SRES), provides huge incentives and rebates on PV solar systems, making it cheaper for homeowners looking to go solar.

    The rebate comes in the form of Small-scale Technology Certificates (STCs), which are tradable for a discount on your overall price. Each STC is worth around 39.90.

    For a 10kW solar system, the total rebate amount you’ll receive greatly varies with the state you live. Normally, states with higher sunlight hours will receive higher rebates than those with lower sunlight hours.

    Below is a breakdown of how much you can expect as a rebate for your 10kW solar system by State.

    StateRebateCost after rebateAvg. annual savings

    Who is eligible for this rebate program?

    Anyone looking to install a solar system in their home is eligible for this rebate program. Your only requirements would be having a system less than 100kW and enough capital to cover the remaining costs after rebates.

    You’ll also have to apply for the rebate through a registered solar retailer. The retailer will give you a point of sale discount based on the STCs you’re entitled to; then, they can later complete the application.

    This makes the process hassle-free and very convenient.

    Alternatively, you can apply for the rebates as an individual through the Clean Energy Regulators portal. For this, you’ll first need to have a solar system (10kW or less) installed in your home.

    Once you receive your STCs, you’ll then have to look for a way to sell them through any Australian STC trading site.

    Is the solar rebate program ending?

    Yes. Unfortunately, the Australian government is slowly phasing out the solar rebate program. It is expected to end by 2030.

    In the meantime, the rebate amount reduces by 1/15 th each year. But this is no reason to worry. With over 10 years left on the program, you can still install a solar system today and enjoy a substantial government rebate.

    How much money will I save with a 10Kw solar system?

    Most homeowners usually want to know, how much does a 10kw save on your power bill? Well, your savings by going solar will depend on your household’s power consumption. The more power you use in your home, the more savings you can make when you install a 10kW solar system.

    For instance, Australia’s average cost of power production is 25c/kWh during the shoulder period. During peak hours, this rate could go as high as 50c/kWh.

    If your home consumes 25kWh daily, your daily power costs will be: 25 x 0.25 = 6.25

    Monthly, your home consumption will approximately be: 6.25 x 30 = 187.50

    Annually, your power bills will be: 187.50 x 12 = 2,250

    Now, if you invest in a 10kWh solar system, you can drastically eliminate this power costs from day one. With the average system of solar power production being a mere 5c – 6c/kWh, here’s how much you can save:

    Assuming your home consumes 25kWh daily, the 10kw solar system will save you the annual 2250 you spend on power bills. Additionally, the extra 15kWh produced by your system could be fed back to the grid through the feed-in tariff program.

    If your utility company pays you 10.2c/kWh for the energy you send to the grid, you’ll save an extra: 15 x 0.102 = 1.53 daily. Monthly this will be 45.9 and yearly, 550.8

    In total, you’ll save: 2250 550.8 = 2,800.80 annually.

    If you use the entire 40kWh daily, you may end up saving = 40 x 0.25 = 10 daily or 300 monthly. Annually, this converts to 3,600 in savings

    Many homeowners usually ask, how much does a 10kw save on your power bill? Ideally, the 10kW solar power system should produce 40kWh daily. However, the system output is subject to the solar system’s location, the panel’s array tilt angle, and orientation.

    Temperatures and shading may also affect the system’s efficiency.

    The 10kw system output also varies depending on the season of the year. Your 10kw solar power system is more likely to generate more electricity during summer than winter.

    Below is a table of the average production per day of a 10kWh by major cities.

    kW Solar System Brisbane | Ideal systems for every budget

    Find out whether a 10kw solar system is suitable for your Brisbane home, and what the ideal system based on your budget.

    You live in a decent sized home and consume a moderate amount of electricity everyday. You’ve decided that you want a solar system, but not sure if a 10 KW system is right for your home. This will help you know more about the 10 KW solar system and its different packages.

    How big is a 10kW system?

    Typically, a 10kW system uses an inverter with a maximum output power of 8kW, and has enough panels to generate 10.6kW of electricity. Generally speaking, each panel is rated at around 330W, and so the total number of panels in the system is 32, which totals to 10600W or 10.6kW.

    10kw, solar, system, brisbane, ideal, systems

    Inverter size smaller than total panels?

    As a result, your panels will very rarely generate their maximum capacity.

    How Do I Know if the 10KW System is Ideal for Me

    If you have a budget for any solar system size, it would be best if you chose one that will give you the maximum benefit without wastage. Think about the following factors before concluding on a 10kW system.

    Your Power Consumption

    A 10kW solar system usually produces around 25kWh a day.

    If your home consumes significantly less power than this, then perhaps a smaller solar system may not be worth it for you, such as a 6kW solar system.

    If you are consuming between 15kWh and 25kWh, then a 10kW solar may be ideal.

    If you are consuming higher than 25kWh, then a 13kW system may be more suitable.

    How do you tell how much electricity you’re using? You can check on your bill.

    Your Electricity Bill

    Your bill will definitely show you how much energy you’re consuming on a daily basis. However, if you don’t have your bill handy, perhaps you know off the top of your head how much you’re paying for your bills?

    Generally speaking, if you pay less than 80 a month on electricity, solar may not be worth it for you.

    But if you pay 150 to 250 a month, a 10kW system would be ideal.

    A 10kW system is suited for households that does consume a moderate amount of electricity. If the following description fits you, then you will benefit from a 10kW system.

    • Your home consists of 3-5 occupants
    • You use air conditioning moderately
    • You use electrical heating moderately
    • Your oven is used on a semi-regular basis
    • Your clothes are hung out to dry rather than using an electric dryer
    • You use your dishwasher regularly
    • You work from home and your occupation uses a lot of electricity

    Your Budget

    Each home has different, and each installation is different. Depending on your state, and when you are getting solar installed, your rebates may be different.

    A general rule of thumb is the cost of the full installation including the inverter is 1/w.

    So a 6kW system will cost you about 8,000. 12,000.

    However, costs are coming down quickly.

    Your roof space

    Even if all the factors above lead you to believe you need a 10kW system or larger, the amount of roof space on your home will heavily dictate whether you can fit it all.

    Each panel is around 1762mm x 994mm, which is 1.75m2

    So to fit 32, your roof will need at least 55m2.

    Not only that, they should ideally be north facing and have minimal shading from nearby trees.

    How Much Can You Save With a 10kW Solar System?

    Your savings will depend on your power consumption.

    A household with a medium energy usage consuming between 15 to 25kWh a day will likely pay about 2181 without solar.

    With solar, such families can save about 2752 reducing their electricity bill and earning about 570 per year by selling back to the grid.

    The table below shows an estimated energy consumption, electricity bills, and savings of different types of households.

    Low Energy-Consuming HouseholdMedium Energy-Consuming HouseholdHigh Energy-Consuming Household
    Daily Power Usage Less than 15kWh 15kWh. 25kWh than 25kWh
    Annual Electricity Bill Without Solar 1,655 2,181 2,708
    Annual Electricity Bill With Solar -1018 -570 92
    Savings 2,672 2,752 2,827

    Product Packages

    There are three different packages available for a 6kW solar panel. The significant difference in the packages is the choice of the panel and the inverter.

    We have put together these packages for you based on years of experience and plenty of feedback from our clients.

    The lower cost options have fewer features and are generally lesser known brand. However, it does not mean they are lower in terms of quality. All these packages will work just fine for you.

    Quality on a Budget

    Quality on a Budget is for families who want to save without losing too much on quality. Although its output power is lower than those of other packages, it is still good enough for the desired result. Also, the durability may not be as much as that of other packages, but they are guaranteed to last for many years.

    Solar Panel. Longi Solar LNG-LR6-600PH-350M_35-v1

    Model Number LNG-LR6-600PH-350M_35-v1
    Country of Manufacture China
    Dimension 1762 x 994 x 35 mm
    Weight 19 kg
    Maximum Power (W) 259.3
    Voltage at Maximum Power (V) 29.4
    Current at Maximum Power (A) 8.83
    Module efficiency (%) 20
    Operating Temperature -40oC to 85oC
    Safety Class Class II
    Wind Resistance 2400 Pa
    Warranty 12 Years

    Inverter. Goodwe GW-GW6500D-MS

    Model Number GW-GW 6500. MS
    Country of Manufacture China
    Dimension 511 x 415 x 175 mm
    Weight 22.5 kg
    Maximum Input Voltage 600 V
    MPP Voltage Range 80. 550 V
    Maximum PV Input Current 12.5 A/ 12.5 A/ 12.5 A
    Maximum Output Current 42.5 A
    Input Power 1350 W
    Output Power 9350 W
    Maximum Efficiency 97.70%
    Warranty 10 Years

    Mid Range

    The Mid Range Package uses Suntech solar panel and Sungrow inverter. The solar panel has a maximum output power of 350 W. Hence it will require about 32 panels to produce 10kW power. Both Suntech and Sungrow are well known in the industry to be quality and effective. Mid Range package is more expensive than the Quality-on-Budget package, but not as much as the High-End package.

    Mid Range package is for users who want top-quality but cannot afford our High-End package. If you buy this package, you will be spending more than you would have spent on our Quality on Budget package, but you can be assured of value for your money.

    Solar Panel. Suntech STP 350S-B60/Wnhb

    Model Number STP 350S-B60/Wnhb
    Country of Manufacture China
    Dimension 1756 x 1039 x 35 mm
    Weight 20.3 kg
    Maximum Power (W) 350
    Voltage at Maximum Power (V) 33.5
    Current at Maximum Power (A) 10.46
    Module efficiency (%) 19.2
    Operating Temperature -40oC to 85oC
    Safety Class Class II
    Wind Resistance 3800 Pa
    Warranty 12 Years

    Inverter. Sungrow SGR – SG8K – D. Premium

    Model Number SGR. SG8K. D
    Country of Manufacture China
    Dimension 360 x 390 x 148 mm
    Weight 15.5 kg
    Maximum Input Voltage 600 V DC
    MPP Voltage Range 90. 540 V DC
    Maximum PV Input Current 12.5 A per MPPT
    Maximum Output Current 34.8 A
    Nominal Output 7750 W
    Maximum Efficiency 98.50%
    Warranty 10 Years

    High End

    The High-End package is the most expensive. It includes a Q-Cells panel and a Fronius inverter. The solar panel has a maximum output power of 350 W. Therefore, you will need about 18 of these panels to produce 6kW.

    This package is for individuals who value quality and desire a durable product. It may cost more than other packages, but it is also of the best quality.

    Solar Panel. Qcell Q Maxx – G2-350

    Model Number Q Maxx. G2-350
    Country of Manufacture China
    Dimension 1740 x 1030 x 32 mm
    Weight 19.9 kg
    Maximum Power (W) 350
    Voltage at Maximum Power (V) 34.24
    Current at Maximum Power (A) 10.22
    Module efficiency (%) 19.5
    Operating Temperature -40oC to 85oC
    Safety Class Class II
    Wind Resistance 4000 Pa
    Warranty 25 Years

    Inverter. Fronius Primo 8.2.1

    Model Number Primo 8.2.1
    Country of Manufacture China
    Dimension 645 x 431 x 204 mm
    Weight 21.5 kg
    Maximum Input Voltage 710 V
    MPP Voltage Range 80. 1000 V
    Maximum PV Input Current 18 A/ 18 A
    Maximum Output Current 37.5 A
    Input Power 12300 W peak
    Output Power 8200 W
    Maximum Efficiency 98.10%
    Warranty 10 Years

    Solar Panel Packages Compared

    PackageQuality on BudgetMid RangeHigh End
    Manufacturer LongiSolar Suntech Q-Cell
    Dimension 1762 x 994 x 35 mm 1756 x 1039 x 35 mm 1740 x 1030 x 32 mm
    Weight 19 kg 20.3 kg 19.9 kg
    Maximum Power (W) 259.3 350 350
    Voltage at Maximum Power (V) 29.4 33.5 34.24
    Current at Maximum Power (A) 8.83 10.46 10.22
    Wind Resistance 2400 Pa 3800 Pa 4000 Pa
    Efficiency (%) 20 19. 2 19. 5
    Warranty 12 Years 12 Years 25 Years

    Inverter Packages Compared

    PackageQuality on BudgetMid RangeHigh End
    Dimension 511 x 415 x 175 mm 360 x 390 x 148 mm 645 x 431 x 204 mm
    Weight 22.5 kg 15.5 kg 21.5 kg
    Maximum Input Power 6650 7100 W 7500 W
    MPP Voltage Range 80. 550 V 90. 540 V DC 80. 1000 V
    Maximum PV Input Current 12.5 A/ 12.5 A/ 12.5 A 12.5 A per MPPT 18 A/ 18 A
    Maximum Output Current 42.5 A 34.8 A 37.5 A
    Output Power 9350 W 7750 W 8200 W
    Maximum Efficiency 97.70% 98.50% 98.10%
    Warranty 5 Years 5 Years 10 Years

    Get a Quote

    You can request a quote for any of our packages. All you need to do is to select your system size, choose your preferred package, then fill in your information and click on Get price.

    Within one business day, we will send a quote to your email address. You can also choose to customize your system by clicking on Build your own.

    Here you will have the option to choose your preferred panel brand and inverter brand.

    kW Solar System UK: Price, How Much Does It Produce, How Big, and

    An 10 kw solar system for the right home or business should save around £54600 over the course of its expected 25 year lifetime. That’s based on grid electric costing £0.34/ kWh (last updated October 2022). That’s roughly £2183 per year in savings, without taking into account inflation or rising electric (which both add to your savings if you invest in solar soon).

    Rising Electric Costs

    The cost of electricity in the UK has consistently ‘outperformed’ inflation. You can see the last few seasons of price rises in this chart of Ofgem’s price cap rises:

    The amount that electricity costs continue to rise will have a large impact on whether you decide if solar is worth it for you in the UK.

    Smart Export Guarantee

    The Smart Export Guarantee replaces the older Feed in Tariff scheme. It allows you to get paid for excess energy that your 10 kw solar system produces but you don’t directly use yourself, for example if you’re out during the day when it’s sunny.

    Currently you can expect to get up to 15p per kWh of electricity you ‘export’, so for a 10 Kw solar system, with typical usage patterns, you could expect to receive around £765 per year in payments under this scheme. This rate is available at the time of writing from Octopus Energy.

    Electricity Savings

    One of the main reasons to consider getting an 10 kW solar system is to save money by directly using the electricity it produces during the day, instead of paying the utility company. The more of your own ‘self generated’ electricity you use instead of buying it or paying for petrol if you’re also buying an electric car, the higher your savings.

    With a properly sized 10 kW solar system, you can expect to save around £1418 per year by using your own solar energy.

    kW Solar Panel System Price

    An 10 kW solar system (without a battery) typically costs around £12000 in the UK. That’s including installation and VAT.

    You can get a free quote from Honest Quotes to get an exact price. They offer a Zero Upfront Cost option for those that qualify.

    Get a quote for solar and or battery installation across the UK from our partners Honest Quotes.

    kW Solar System – Costs, Savings, Payback

    A 10kW solar panel system is best suited for large homes. A 10kW system is also suited to electric car owners or those planning to buy one in the future.

    • 27 Tier 1 Solar Panels
    • CEC Approved 10kW Inverter
    • Installation by CEC Qualified Retailer

    Is a 10kW Solar System Suitable for My Home?

    A 10kW solar panel system is best suited for larger homes, or homes with more energy-intense appliances. A 10kW solar energy system is also suited to electric car owners or those planning to buy one in the future. 10kW systems produce up to 42kWh per day, which is more than twice the average energy consumption for Australian households. 10kW systems may require a 3-phase power connection due to their ability to export more than 5kw at a time.

    While a 10kW system is more costly than smaller systems, it can produce more power. If you have higher energy requirements, it’s often quicker to pay off the cost of installation by installing a system with a larger capacity.

    A 10kW solar power system is also well suited for battery backup systems, as it can produce enough power to fully charge a home battery, and provide the home with power. If you have more than 2 children or live in a household of more than 4 people, a 10kw solar system is likely to cover your needs. If you are planning on staying at your current location, a 10kW solar panel system can future-proof your home from growing energy requirements.

    How Many Solar Panels are in a 10kW System?

    A 10kW system has between 27 to 33 panels. The number of panels you need largely depends on the quality and efficiency of the solar panels you choose.

    Solar panels also vary in power output. These power outputs vary from 250 to 400 watts for domestic applications.

    The size of a solar system is based on the number of panels used in the installation. For example, to achieve a 10kW solar system you will need one of the following panel count and output combinations:

    Panel Power OutputNumber of Panels for a 10kW System
    200 50
    250 40
    300 33
    350 29
    370 27
    400 25

    If you’re using 370 W panels, you’ll only need only 27 panels or modules. However, if you combine this system with a solar battery, you’ll need a 10kW inverter as well with MPP.

    Do I Have Enough Roof Space for a 10kW Solar System?

    You will need around 45.9m 2 of available space on your rooftop. Each solar panel is around 1.7m x 1m, and you will need between 25 – 30 solar panels, depending on their power output.

    Average residential installations will generate between 330 – 400 W of power during daylight hours. However, the 10 W system requires a significant amount of energy, so you will need around 25 to 30 solar panels.

    On average, solar panels are 1.7m long and 1m wide. Therefore, if you install 27 solar panels at 370W each, you’ll need approximately 45.9 square metres of available roof space.

    How Much Does a 10kW Solar System Cost?

    The CEC recommends a 10kW system should cost between 7400 and 14100. The cost of solar panels depends on many factors, including their quality, model type, and more.

    It’s important to recognise that financing your solar system is a great way to reduce the upfront cost. As well as this there are many rebates available depending on your state and location that can reduce the cost of solar.

    A larger size system can generate more electricity, but it’s fairly expensive. While it may not feel budget-friendly at first, solar power can offer quick returns on your investment and help you build a more sustainable future.

    Even if your self-consumption level is low, the extra electricity you generate can be fed into the grid. This will help you with rebates and increase your savings.

    The ultimate cost of getting a solar panel system installed will depend on the following factors:

    You can contact accredited solar retailers like Instyle Solar for a free quote on how much it would cost to install a 10kW system for your household. If you’re lucky, you might even get a discount on the panels.

    How Much Will a 10kW Solar System Save You?

    Over their 25-year lifespan, 10kW solar systems can save you over 100,000 when taking inflation into account. This saving is a combination of exporting electricity to the grid and using the power in the home. On a yearly basis, a 10kW solar system will save you 3,220.33 when first installed.

    As the demand for solar panels increases, their cost pricing becomes more competitive. In January 2018, the mean solar cost was 3 per watt. Since then, it’s decreased to around 0.91.

    Owning a solar battery can help you even further by allowing you prominent daytime usage and excess electricity for when the sun goes down.

    What is the Payback Period for a 10kW Solar System?

    Most Australians can expect to make a complete return on 1 kW solar systems in 3.35 years if they consume 50% of the energy they produce.

    The payback time is how long it takes to equalise total investment for the system’s installment and electricity bill savings.

    In some major cities, 10kW solar systems can deliver around 35 – 44kWh of electricity. This makes 10kW solar systems ideal for people who have electricity bills higher than 1,000 per quarter. This can save you more than 4,000 per annum. Homeowners stand to save up to 22 to 30 cents perkWh.

    Below is a table that shows the average payback time for homeowners in each major city to break even on their solar installation cost:

    CitySystem CostElectricity TariffFeed-In TariffEnergy ConsumptionAnnual SavingsPay Off Period (Years)
    Adelaide 10,500.00 0.38 0.12 50% 4,270.74 2.46
    Brisbane 10,500.00 0.28 0.12 50% 3,650.00 2.88
    Canberra 10,500.00 0.23 0.12 50% 2,810.50 3.74
    Darwin 10,500.00 0.27 0.08 50% 3,462.94 3.03
    Hobart 10,500.00 0.25 0.065 50% 2,127.71 4.93
    Melbourne 9,000.00 0.20 0.12 50% 2,394.40 3.76
    Perth 10,500.00 0.29 0.10 50% 3,772.28 2.78
    Sydney 10,500.00 0.24 0.15 50% 3,274.05 3.21

    These numbers are based on figures reported when this table was created. Average costs may have changed. SolarVic offers up to 1500 off the cost of solar.

    Talk to a solar installer and get a free quote on the price; they offer excellent services to all potential clients.

    How Long Will a 10kW Solar System Last?

    You can expect 10kW solar systems to last 25 – 30 years if installed correctly. After that, the efficiency of the solar battery starts lowering.

    The power degradation rate of a 10kW solar system with battery storage is approximately 0.8% per year.

    Do solar panels degrade over time? The panels become inefficient at producing electricity over time, and their solar system output also decreases.

    The degradation process can take up to 30 years to take effect on any high-quality solar system.

    Known as LetID (Light Elevated Temperature Degradation), this phenomenon is caused by sunlight.

    For premium quality panels, the degradation rate is 0.3% per year. Solar system durability can be enhanced by taking care of individual components.

    How Much Power Does a 10kW Solar System Produce?

    With a 10kW system, you can expect to produce around 35 – 44kWh of electricity every day.

    A 10kW solar system can generate 11,000kW to 15,000kW of electricity yearly.

    This production capacity varies with different regions, seasons, and climates. For example, a 10kW system will produce less power in winter compared to the summer. Knowing your seasonal usage can help you understand whether a 10kW system would work for you in colder months.

    Below, you can find the 10kW energy production in major cities in Australia:

    CitySystem SizePeak Sun HoursTotal Energy Production (KW)
    Adelaide 10kW 4.7 47
    Brisbane 10kW 5 50
    Canberra 10kW 4.4 44
    Darwin 10kW 5.5 55
    Hobart 10kW 3.7 37
    Melbourne 10kW 4.1 41
    Perth 10kW 5.3 53
    Sydney 10kW 4.6 46

    Will a 10kW Solar System Power Your Home?

    A 10kW system can meet the present and future needs of any household with a power bill of around 1,000 per quarter. This is usually sufficient to power a four-person family home that is 185 m 2 in area.

    A 10kW while larger than most systems, is actually better suited for the modern family. You may later switch to an electric car or convert to an all-electric house as the government creates more initiatives to hit climate objectives in the near future.

    It makes practical sense for homeowners wanting to replace gas-powered appliances with electric counterparts.

    Can I Install a Battery with a 10kW Solar System?

    Absolutely! You can most certainly add a battery to your 10kW system. Battery storage allows you to use electricity you have stored in low iridescence conditions.

    This means you can utilise your system even at night. As a result, you can be independent of grid-supplied power at nighttime.

    Solar systems with battery storage also earn their keep during calamities. Having a sustainable source of power production and storage is invaluable during natural disasters like hurricanes, where grid power can take days to recover from.

    Contact certified installers right now to have your 10kW solar battery installed! They’ll inform you about the legalities of owning a 10kW solar system with battery storage, including:

    Within 10 days of installation, a team of State electrical authorities inspects the energy usage. Before that, the installer must send a certificate to the State Authority.

    For meter upgrades, the accredited solar installer will notify the electricity retailer. The retailer will send a distributor to upgrade the electric meter. The entire process takes around three weeks.

    After the whole process is complete, the solar system will start working. That’s when your real saving begins!

    Should I Consider a Larger or Smaller System?

    This depends on your long-term plan for converting to solar.

    Larger systems can help power your entire household and car and even export surplus electricity to the grid. However, they are more expensive and thus require a greater initial investment.

    A smaller system may not be able to meet your self-consumption needs, but they are usually more affordable and don’t require substantial start-up capital.

    However, larger systems have become more popular with users in recent years. This is due to:

    • The cost of the larger systems dropped significantly on a yearly basis.
    • Energy production is superior to smaller systems.

    If your house has a reverse cycle air conditioning system, home automation, and a quarterly electricity bill of 800, a 10kW solar system is an excellent choice.

    10kw, solar, system, brisbane, ideal, systems

    What other systems are there?

    There are a number of system sizes to choose from including:

    Get Started!

    Interested in getting solar for your home? By clicking below you can use our Smart solar calculator to find out just how much you could save with solar, what incentives you’re eligible for, and the positive impact you can have on the environment.

    Don’t wait until next quarter’s bloated bill, and get started today!

    Join over 20,000 homeowners who have made the switch with Instyle Solar, or the 1000 positive reviewers who have been more than happy with their solar install.

    Otherwise, you can always contact us on 1300 133 556, or email us at

    Ready to Start Saving with a 10 kW Solar System?

    Let’s calculate exactly how much a s 10 kW solar system could save you on your bills! Click now to get started.

    SOLAR POWER FOR HOMES BUSINESSES Getting started with a 10.3KW solar panel system

    Our 10.3KW solar power system is one of our most popular packages, offering fantastic value for money. The 10.3KW solar solution is an ideal choice for larger family homes, offices, and small commercial operations. Many businesses find that a 10.3KW is the perfect middle ground between a 6.6KW residential and 30KW commercial solar power system.

    Arise Solar is proud to offer the best 10.3KW solar panel system that money can buy, with access to the most advanced Tier 1 solar technology in the business.

    TIER 1 SOLAR PANELS 10,300W Of Solar Panels Power Out-Put

    Tier 1 solar module Reputed solar brand High efficiency solar module 25 years of panel linear output warranty Local Australian support

    SOLAR INVERTER1 X 8KW Inverter

    High Efficiency Proven track record Online monitoring (optional)

    PANEL MOUNTING KITFlexible Roof Mounting Solution

    Available in tin, tile and clip lock Fully anodised and corrosion-resistant Light weight Easy to install


    Experts with Tons of Experience. Fast Turn Around

    Speak to an expert Request a call back to discuss your needs.

    Let us analyse your electricity bills to find the best solar panels and system for your household or business. Call 1300 274 737 or use the button below to request a call back from one of our friendly consultants for an obligation-free chat.

    What is a Tier 1 Solar Panel System?

    Solar power is broadly recognised as a simple and effective way to reduce your CO2 emissions and energy bills, but not all solar panel systems are equal. Some aren’t designed to cope with Australia’s heat, others don’t deliver comparable performance. A poorly performing system will limit your sustainability and financial return. The best way to protect your investment is to select high quality solar products designed for life in Australia.

    Solar panel manufacturers are ranked into three tiers, 1-3. Tier 1 solar manufacturers gain the top ranking by proving themselves to be reliable and stable and they provide the best value products on the market. Only a small percentage of solar panels manufacturers around the world have achieved the top Tier 1 ranking. Arise Solar only sells and installs Tier 1 products, giving you the peace of mind of receiving quality products that will provide the best return on investment.

    Our 10.3KW solar system solution is designed for the needs of growing Australian families and business owners: efficient, weather resistant, and capable of meeting your power demands on a daily basis.

    Quality you can trust

    Arise Solar is 100% Australian owned and operated — and one of the country’s leading solar providers.

    We have offices in Melbourne, Sydney, Brisbane, and Adelaide and service the entire nation with a large network of professional, qualified installers.

    Our 10.3KW solar panel system comes with a 25 year performance warranty, 10 year manufacturer’s warranty, and 5 year warranty on workmanship (including installation).

    To find out if a 10.3KW solar panel system is right for your home or business, give us a call on 1300 274 737 or get a quote now.

    Leave a Reply

    Your email address will not be published. Required fields are marked *